User's Manual

30 System settings
2
Subwoofer
1)
/
3
Bass /
4
Treble
Y
ou can adjust the Subwoofer*, Bass and Tre-
ble settings by turning the rotary pushbutton.
New settings apply only to the currently acti-
vated audio source, allowing the settings of
each audio source to be adjusted individually.
5
Balance/fader (sound focus)
The settings depend on the equipment fitted
in your vehicle:
– T
o set the left/right volume ratio: Select
and confirm Balance. Turn the rotary push-
button clockwise or anti-clockwise to the de-
sired position.
– To set the front/rear volume ratio: Select
and confirm Fader. Turn the rotary pushbut-
ton clockwise or anti-clockwise to the de-
sired position.
– To set the volume ratio using MMI touch:
Move your finger in the desired direction on
the MMI touch pad.
– To set the sound focus*: Select and confirm
Focus > all (evenly distributed sound focus)/
front/rear (sound focus distributed evenly in
front/rear interior of vehicle).
6
GALA (speed-dependent volume
control)
Y
ou can adjust the automatic volume adaption
to the interior noise level by turning the rotary
pushbutton.
Surround
2)
Turn the rotary pushbutton to adjust the vol-
ume of the surround effect.
Adjusting the system
volume
►
Select:
MENU
button > T
one > Systems.
Telephone*
Ring tone: see
ð page 38
Ring tone volume/V
olume of telephone call:
The volume of the selected ring tone/the vol-
ume of the telephone call can by adjusted by
turning the rotary pushbutton.
Systems
Speech dialogue system volume*: Turn the
rotary pushbutton to adjust the volume of the
spoken cues.
MMI touch volume: Turn the rotary pushbut-
ton to adjust the volume of the spoken cues
for MMI touch.
Announcements
Traffic programme: see ð page 55
DAB announcements*: see ð page 55
Traffic programme volume/Announcement
volume: You can adjust the volume of a traffic
announcement by turning the rotary pushbut-
ton.
Navigation*
Voice guidance: see ð page 52
Navigation cues during call: see ð page 52
Volume of spoken cues/In-car entertainment
fader: Volume of navigation cues while route
guidance is active. The in-car entertainment
fader is an option that reduces the volume of
the current audio source when the parking aid
is active or a navigation cue is being played.
Parking aid*
Turn the rotary pushbutton to adjust the vol-
ume of the beeps.
1)
Applies to vehicles with Bang & Olufsen Sound System
and Audi Sound System (6-channel)
2)
Applies to vehicles with Bang & Olufsen sound system
2
Titel oder Name, Abteilung, Datum