User's Manual

34 Telephone
– The Bluetooth function and the discover
abil-
ity of the MMI system ð page 38 and the
mobile phone must be activated.
– The on-board phone system and the mobile
phone you would like to bond must not be
connected actively to any other Bluetooth
device.
Searching for a mobile phone
– To find a new mobile phone: Select
TEL
button > Connect mobile phone > Find new
devices. Or: Select
TEL
button > control
button Settings > Bluetooth > Device man-
agement > Find new devices.
The available
Bluetooth devices are shown on the MMI
display.
Bonding a mobile phone
– To bond a mobile phone with PIN entry: Se-
lect and confirm the mobile phone you wish
to use. Select and confirm Handsfree. A PIN
code for establishing the connection will ap-
pear on the MMI display. Select and confirm
Yes. When the phone requests it, enter the
PIN code shown into your mobile phone. Or:
To enter any 4 to 16-digit PIN code, select
and confirm No when the PIN code is dis-
played and enter your own personal PIN
code on the MMI and then on the mobile
phone.
– Fast bonding (secure simple pairing): If
your mobile phone supports this function, a
6-digit PIN code will be shown on your mo-
bile phone and on the MMI display simulta-
neously. Confirm this PIN code on your mo-
bile phone and in the MMI.
Please confirm any connection queries on your
mobile phone.
After bonding: The signal strength bar
11
ð page 10, Fig. 6 and Bluetooth symbol
10
will appear in the status line of the MMI dis-
pla
y when the mobile phone has successfully
bonded. In addition, the contacts on the mo-
bile phone are automatically loaded into the
directory of the MMI. This may take several
minutes, depending on how many contacts
are stored on the mobile phone.
If there is no memory capacity left for directo-
ries and you bond another mobile phone, a
message will appear asking you to r
eplace the
contacts from one of the phones. If you select
the option Restricted use of telephone, only
the contacts from the mobile phone or SIM
card and the local MMI memory (public) will
be available ð page 41.
Note
– Y
ou have about 30 seconds to enter the
PIN code.
– Bluetooth devices only have to be bon-
ded once; any devices that have already
been bonded to the MMI system once
are connected automatically when they
are within range and the ignition is on.
– You can speed up the automatic connec-
tion by authorising MMI bonding on your
mobile phone.
–
For further information, contact your
mobile network ser
vice provider or refer
to the operating instructions for your
mobile phone.
–
You can bond several mobile phones to
the MMI system; however only one con-
nection is active at a time.
–
Any Bluetooth device that is already con-
nected to the MMI system is disconnec-
ted when another device is bonded to
the system.
–
The Bluetooth connection between the
system and the mobile phone is auto-
matically terminated when you leave the
car.
– For further information on using a phone
in your car, please go online (e.g.
www.audi.com/bluetooth) or ask an Audi
dealer.
2
Titel oder Name, Abteilung, Datum