User's Manual

60 Playing media
Note
– Only the categories suppor
ted by the
medium used are available. For example,
CD/DVD-ROM tracks cannot be selected
via categories such as Artists, Albums or
Genres. When you are using an iPod®
(source: Audi music interface), the cate-
gories Podcasts, Audiobooks and Com-
posers are available additionally.
– For safety reasons, the video picture is
not available while the vehicle is moving.
While you are driving, only the sound is
played.
–
Video playback via an iPod®/iPhone®/
iP
ad® will not continue automatically
when you switch on the engine after it
was switched off completely.
–
On some video DVDs it is not possible to
select e.g. the audio track, subtitles or
track/chapter while they are being
played.
–
If you synchronise an iPod/iPhone/iPad
with "cloud" services (iCloud), the play-
lists may not be displayed correctly on
the MMI. Use the Apple device's local
media library.
Other settings
Impor
tant: A source must be selected.
►
Select:
MEDIA
button > control button
Settings.
Depending on the active source and the stor
-
age device used, you can select the following
settings:
Sound settings
Refer to ð page 29.
Input level
Important: A portable player must be connec-
ted via an adapter cable with 3.5 mm jack
plug*/AV adapter cable*/iPod® adapter cable
(plus)* ð page 26.
The volume of the portable player will be
adapted to the MMI system. We recommend
setting the volume of the portable player to
about 70 percent of the maximum volume.
Random playback
When the function is switched on , all the
files in the pla
ylist will be played and shown in
random order.
Repeat track
When the function is switched on , the cur-
rent track in the playlist will be repeated.
Video picture settings
Important: A portable player must be connec-
ted via an iPod® adapter cable plus*/AV
adapter cable* ð page 26
Picture format: The picture format can be ad-
justed automatically. The width of the picture
will vary depending on the film format. Alter-
natively you can select the formats 4:3 and
16:9. The zoom function can be used to ex-
pand the picture to the full MMI screen; select
original if you would like to view the picture in
the stored format. You can set the cinema-
scope option to display the picture in the for-
mat 47:20.
AV standard: PAL, NTSC or auto can be set as
the standard for an externally connected play-
er. The same standard must also be set on the
player. If you select the wrong AV standard,
the following problems can occur: no picture
or a poor picture or no colour picture.
Brightness: The brightness can be increased/
reduced.
Contrast: The picture contrast can be in-
creased/reduced.
Colour: The colour intensity can be increased/
reduced.
Reduced display
When this function is switched on  and the
playlist is open, information on the selected
track (e.g. the artist, album, embedded album
cover*) as well as the total and remaining
playing time will be displayed. When this dis-
play is active, you can also select and confirm

2
Titel oder Name, Abteilung, Datum