User's Manual

7MMI control console
ControlsCommunicationNavigationEntertainment
MMI control console
Switching the MMI
system on/
off
The MMI system is switched on/off automati-
cally when the ignition is switched on/off. In
addition it can be switched on/off manually.
– To switch on manually: Briefly press the
ON/OFF button
5
ð page 5, Fig. 1
.
– T
o switch off manually: Press and hold the
ON/OFF button until the MMI is switched
off. The MMI system will not be switched on
automatically when the ignition is switched
on if it was turned off manually the last
time it was operated.
When the system is switched on, the last se-
lected menu will be displayed, and the last se-
lected audio source will be played.
The MMI system remains in operative mode
for approximately ten minutes after the igni-
tion is switched off. If you do not press any
button or the rotary pushbutton on the MMI
control console within this period, the MMI
system will be switched off automatically.
Note
– If the engine is switched of
f and the bat-
tery charge level is low, the MMI system
will be switched off automatically.
– You can also switch on the MMI system
manually by pressing the
MENU
button
or one of the buttons for calling up me-
nus dir
ectly
6
ð page 5, Fig. 1.
Adjusting the volume
Using the ON/OFF button, you can adjust the
volume of an audio source or system message
(e.g. during a speech dialogue) directly while
it is being played.
– V
olume up/down: Turn the ON/OFF button
clockwise or anti-clockwise.
– Mute: Briefly press the ON/OFF button.
– Unmute: Briefly press the ON/OFF button or
turn the ON/OFF button clockwise.
Note
When you switch on the MMI system, very
high/
very low volume levels are automati-
cally reduced/increased to a preset level.
How to use the
con
trols
You can easily call up the various functions of
the MMI system with its intuitive and stand-
ardised control layout.
Fig. 2 How to use the controls
Selecting and confirming a function
►
A
T
o select a function: Turn the rotary
pushbutton to the desired function.
►
B
T
o confirm the function: Press the rotary
pushbutton.
Calling up a function in a corner of the
display
►
Press the control button
C
that corre-
sponds to the corner of the displa
y. For in-
stance, the top right control button corre-
sponds with the top right corner of the dis-
play.

2
Titel oder Name, Abteilung, Datum