User's Manual Part 1

General Handling
User Interface Elements
Power to operate the navigation radio is supplied through the
ignition switch, which must be in the ON, ACC or in ACC Delay
mode in order to operate the navigation radio.
(4) ON/OFF VOLUME
It is also possible to set the unit in standby mode during driving,
by pressing the ON/OFF VOLUME rotary knob (4).
Note: If the ignition is switched off with the radio in standby mode, the
radio memorizes the standby state when the ignition is switched on again.
Press the (4) ON/OFF VOLUME rotary knob to switch the radio on. The
navigation software is always working when the ignition is switched on,
even if the radio is in standby mode. It is possible to eject the CD and to
display the time if the unit is switched off.
Soft-Keys
Soft-keys are accessible on the touch screen.
Hard-Keys
Hard-keys on the left and right side of the radio faceplate.
(1) OPEN/CLOSE
To open or close the display, press the OPEN CLOSE hard-key
(1).
After opening the display, it takes a few seconds to eject a CD/
DVD, if one was in the slot.
When inserting a disc, make sure the label is facing up.
The display will close automatically after inserting the disc.
GENERAL HANDLING
5