User's Manual Part 1

Inserting a Disc

1. Press the OPEN/CLOSE hard-key once.

2. With the printed side upwards, insert the disc into the disc slot

of the radio. The radio pulls the disc automatically and closes the

ﬂip screen. The radio selects the appropriate mode after the disc

is recognized, and starts playing the ﬁrst track. The display

shows “Reading...” during this process.

Note: A faulty CD is NOT automatically ejected. Use only standard size

discs. Discs that have been modiﬁed with an adhesive label should not be

used in the CD/DVD player.

High deﬁnition content and media (e.g HD-DVD, Blue-Ray) is not

supported.

If the user doesn't remove an ejected CD within approximately

10 seconds, the CD will reload.

Note: On MP3 and WMA CD’s with a large number of songs, it may take

several seconds to read, play, and display information for all songs on the

disc.

Note: Recording your own CD on a home computer at a lower write speed

will result in a more consistent quality.

Removing a Disc

1. Press the OPEN/CLOSE hard-key.

2. The disc is ejected and can be removed.

Note: If the disc is not removed within approximately 10 seconds, the unit

pulls it back into the slot (park position). The disc may be ejected when the

ignition is off.

3. Press the OPEN/CLOSE hard-key to close the display. The

display will close within 30 seconds after the disc is pulled from

the mechanism.

Selecting Disc Mode

Toggle between the media and the radio menus by pressing the

RADIO/MEDIA hard-key. The disc mode can be selected by

touching the Disc tab soft-key.

Note: When a disc is inserted, the appropriate mode is automatically

selected once the disc is recognized.

MEDIA