User's Manual Part 2

AUX Mode
The AUX connector allows you to connect the headset output of
an audio device (e.g., MP3 player) to the navigation radio. The
audio of the connected device will then be played through the
navigation radio sound system.
Connect a 3.5 mm stereo mini-jack cable as shown above (not
provided with the radio) to the AUX connector on the navigation
radio and to the earphone connector of your audio device.
The display will switch automatically to the AUX mode, when a
3.5 mm stereo mini-jack cable has been connected. The radio
screen will revert back to the last tuner mode when the cable is
unplugged.
To change radio modes while the cable is connected to the unit,
press the RADIO/MEDIA hard-key until the AUX tab is displayed
on the top of the screen. Touch the AUX tab to return to the AUX
mode.
Adjust the volume with the ON/OFF VOLUME knob, or with the
volume of the attached device.
The control of the external device (e.g., selecting playlists, play,
fast forward, etc.) cannot be provided by the radio; use the de-
vice controls instead.
Note: Inserting of a mono jack will result in improper audio playback.
REMOTE DEVICES
73