User's Manual Part 2

You can pair up to seven cellular phones to your UConnect™
system. However, at any given time, only one cellular phone can
be in use, connected to your UConnect™ System. The priority
allows the UConnect™ system to know which cellular phone to
use if multiple cellular phones are in the vehicle at the same
time.
For example, if priority 3 and priority 5 phones are present in the
vehicle, the UConnect™ system will use the priority 3 cellular
phone when you make a call. You can select to use a lower prior-
ity cellular phone at any time (refer to “Advanced Phone Connec-
tivity” section).
Dial by Saying a Number
1. Press the UConnect™ hard-key to begin.
2. Wait for the beep.
3. Say DIAL.
4. When prompted, after the beep, say the number you want to
call.
For example, you can say “234-567-8901.” The phone number
that you enter must be of valid length and combination. Based on
the Country in which the vehicle was purchased, the UConnect™
limits the user from dialing invalid combination of numbers. For
example, in USA, 234-567-890 is nine digits long, which is not a
valid USA phone number - the closest valid phone number has
ten digits.
5. The UConnect™ system will ask you to confirm the phone
number and then dial. The number will appear in the display of
the navigation radio.
Call by Saying a Name
1. Press the UConnect™ hard-key to begin.
2. Wait for the beep.
3. Say CALL.
4. When prompted, after the beep, say the name of the person
you want call.
For example, you can say “John Doe,” where John Doe is a
previously stored name entry in the UConnect™ phonebook.
Refer to section “Add Names to Phonebook,” to learn how to
store a name in the phonebook.
5. The UConnect™ system will ask you to confirm the name and
then dial the corresponding phone number, which will appear in
the display of the navigation radio.
SPEECH DIALOGUE SYSTEM
84