User's Manual

phone call using UConnect™. The status is given for roaming,
network signal strength, phone battery strength, etc.
Dial Using the Cellular Phone Keypad
You can dial a phone number with your cellular phone keypad
and still use the UConnect™ system (while dialing via the cell
phone keypad, the user must exercise caution and take precau-
tionary safety measures). By dialing a number with your paired
Bluetooth™ cellular phone, the audio will be played through your
vehicle’s audio system. The UConnect™ system will work the
same as if you dial the number using voice recognition.
Note: Certain brands of mobile phones do not send the dial ring to the
UConnect™ system to play it on the vehicle audio system, so you will not
hear it. Under this situation, after successfully dialing a number, the user
may feel that the call did not go through even though the call is in pro-
gress. Once your call is answered, you will hear the audio.
Mute/Un-mute (Mute off)
When you mute the UConnect™ system, you will still be able to
hear the conversation coming from the other party, but the other
party will not be able to hear you.
In order to mute the UConnect™ system:
1. Press the UConnect™ button to begin.
2. Wait for the beep.
3. Say MUTE or MUTE ON.
In order to unmute the UConnect™ system:
1. Press the UConnect™ button to begin.
2. Wait for the beep.
3. Say UNMUTE or MUTE OFF.
You may also select Mute Call or Unmute Call with the CENTER
CONTROL knob an confirm your selection by pressing the JOY-
STICK.
Advanced Phone Connectivity
Transfer Call to Cellular Phone
The UConnect™ system allows ongoing calls to be transferred to
your cellular phone without terminating the call.
To transfer an ongoing call from the UConnect™ system to your
UConnect™ paired cellular
1. Press the VR button (bargin-in).
SPEECH DIALOGUE SYSTEM
111