User's Guide

56
4. MY DESTINATIONS
■LOADING ADDRESSES VIA A USB
MEMORY
1 Open the cover of the USB/AUX port
and connect a USB memory.
z The USB/AUX port is located on the
instrument panel, or in the console box or
glove box etc. The location and design are
different depending on the vehicle. For
details, see the Pictorial index of “Owner’s
Manual”.
2 Touch “Dest” on the map.
3 Touch “Enter Destination”.
z The “Enter Destination” screen can be dis-
played by touching on any of the
“Navigation” screens.
4 Touch “Advanced” on the “Enter Des-
tination” screen.
5 Touch “Load Contacts from USB”.
6 The following screen will be displayed
while loading the data.
z To cancel this function, touch “Cancel”.
7 The following screen will be displayed
when loading is complete.
8 The entry is registered in the “Stored”
list on the “My Destinations” screen
and “Contacts” screen. (See pages 52
and 165.)
REGISTERING FROM AN
EXTERNAL DEVICE
“vCard” formatted data can be trans-
ferred from a USB memory to this sys-
tem. Transferred addresses and
numbers will be stored in the “Stored”
list on the “My Destinations” screen
and “Contacts” screen. (See pages 52
and 165.)
NOTICE
● Do not turn off the engine while down-
loading.