User's Manual

30 Uconnect™ ACCESS USER’S MANUAL
Gently insert one Disc into the Disc player with the Disc
label following the illustration indicated on the player.
The Disc will automatically be pulled into the Disc player
and the Disc icon will illuminate on the radio displa y. If
a Disc does not go into the slot more than 1.0 in (2.5 cm),
a disc may already be loaded and must be ejected before
a new Disc can be loaded.
If you insert a Disc with the ignition ON and the radio
ON, the unit will switch to Disc mode and begin to play
when you insert the Disc. The display will show the track
number, and index time in minutes and seconds. Play
will begin at the start of track 1.
Browse
Touch the browse soft -key to scroll through and select a
desi red track on the Disc. Touch the exit soft -key if you
wish to cancel the browse function.
Eject Button – Ejecting a Disc
Press the EJECT button to eject the Disc. If you have
ejected a Disc and have not removed it within 10 seconds,
it will be reloaded. If the Disc is not removed, the radio
will reinsert the Disc but will not play it.
A Disc can be ejected with the radio and ignition OFF.
USB/iPod ® Mode
USB/iPod ® Mode is entered by either inserting a USB
Jump Drive or iPod ® cable into the USB port or by
touching the Media hard-key located left of the display.
Once in Media Mode, touch the sou rce soft -key and select
USB/iPod ® .
Inserting USB/iPod ® Device
Gently insert the USB/iPod ® device into the USB Port. If
you insert a USB/iPod ® device with the ignition ON, the
unit will switch to USB/iPod ® mode and begin to play