User's Manual
Table Of Contents
- EXISTENCE OF NAVIGATION CAPABILITIES
- SYMBOLS USED IN ILLUSTRATIONS
- HOW TO READ THIS MANUAL
- NAVIGATION SYSTEM OWNER’S MANUAL
- NAVIGATION SYSTEM
- IMPORTANT INFORMATION ABOUT THIS MANUAL
- SAFETY INSTRUCTION (MULTIMEDIA SYSTEM)
- SAFETY INSTRUCTION (NAVIGATION SYSTEM)
- 2. CONTROLS AND FEATURES
- 1. QUICK GUIDE
- 1. BASIC OPERATION
- 2. RADIO OPERATION
- 3. MEDIA OPERATION
- 4. AUDIO REMOTE CONTROLS
- 5. TIPS FOR OPERATING THE AUDIO SYSTEM
- 1. BASIC INFORMATION BEFORE OPERATION
- 2. PHONE OPERATION
- 3. SHORT MESSAGE FUNCTION
- 4. WHAT TO DO IF...
- 1. VEHICLE INFORMATION
- 1. SETUP OPERATION
- 1. QUICK REFERENCE
- 2. GENERAL SETTINGS
- 3. DISPLAY SETTINGS
- 4. Bluetooth® SETTINGS
- 5. CONNECTIVITY SETTINGS*
- 6. TELEPHONE SETTINGS
- 7. AUDIO SETTINGS
- 8. VEHICLE SETTINGS
- 1. REAR VIEW MONITOR SYSTEM
- 1. BASIC INFORMATION BEFORE OPERATION
- 2. MAP SCREEN OPERATION AND MAP ICONS
- 3. DESTINATION SEARCH
- 4. ROUTE GUIDANCE
- 5. MY DESTINATIONS
- 1. REGISTERING AN ENTRY
- 2. DISPLAYING AND EDITING THE ENTRY INFORMATION
- 3. SENDING AND RESTORING STORED CONTACTS USING A USB MEMORY
- 6. NAVIGATION SETTING
- 7. NAVIGATION SYSTEM INFORMATION
- 1. APPLICATIONS OPERATION
- 2. CONNECTED SERVICE
204
5. MY DESTINATIONS
■LOADING POIs AND ROUTES VIA A
USB MEMORY
1 Open the cover of the auxiliary box and
then open the cover of the USB/AUX
port.
2 Connect a USB memory.
3 Display the “Navigation” menu screen
and select “Enter destination”.
(→P.163)
4 Select the “Advanced” tab.
5 Select “Load POIs and routes from
USB”.
6 Check that a progress bar is being dis-
played while the data loading is in
progress.
z To cancel this function, select “Cancel”.
7 Check that a confirmation screen is
displayed when the operation is com-
plete.
8 Check that the entry is registered in the
“Stored” list on the “My destinations”
screen. (→P.200)
REGISTERING FROM AN
EXTERNAL DEVICE
“vCards” formatted data can be trans-
ferred from a USB memory to this sys-
tem. Transferred POIs and routes will
be stored in the “Stored” list on the “My
destinations” screen. (→P.200)
INFORMATION
● Downloading may not complete cor-
rectly in the following cases:
• Vehicles without a smart entry & start
system: If the engine switch is turned
to the “LOCK” position during down-
loading.
• Vehicles with a smart entry & start sys-
tem: If the engine switch is turned off
during downloading.
• If the USB memory is removed before
downloading is complete
● If the maximum number of possible
stored contacts has been reached, a
confirmation screen appears.
Delete contact(s) to make room for new
contact(s). (→P. 8 3)