User's Manual

Table Of Contents
245
2. CONNECTED SERVICE
8
APPLICATION
5. OPERATING AN APPLICATION USING CONNECTED SERVICE
1 Open the cover of the auxiliary box and
then open the cover of the USB/AUX
port.
2 Connect a USB memory.
3 Select “Yes” when the confirmation
screen appears.
4 Select “Enter Key” and then enter the
license key.
z If the license key is invalid, the application
will not be downloaded.
5 Select “Confirm”.
6 Check that the updating screen is dis-
played.
DOWNLOADING AN
APPLICATION TO THE
SYSTEM
To download an application, a USB
memory that contains the application
data is required. For details about an
application, refer to Toyota portal site
(www.my.toyota.eu
).
: Navigation system only
INFORMATION
Downloading may not complete cor-
rectly in the following cases:
Vehicles without a smart entry & start
system: If the engine switch is turned
to the “LOCK” position during down-
loading.
Vehicles with a smart entry & start sys-
tem: If the engine switch is turned off
during downloading.
If the USB memory is removed before
downloading is complete