User's Manual Part 2
245
4
Advice for Emergency Situations
s5SINGTHESPECIALRECTANGULARSLOTD on the LH side of the tool kit
(indicated by a plate), place the release wrench in the hole (in the
top of the slot) and turn it clockwise.
This movement loosens the parking brake cables.
Important note
To release the brake completely, the wrench needs to be
turned 50 times and it starts to be released after approximately
20 turns.
Once the electric parking brake has been manually released, the
EPB node records a failure at the next key-on and a symbol and
the following message “Parking Brake system revision. Go to
dealer” is displayed on the TFT display.
Warning
The parking brake resumes normal operation but it is important
to go to the nearest workshop to have it calibrated and delete
any errors in the error memory.
Go to a Ferrari Service Centre.
Calibration is necessary for safety reasons.
D