User's Manual Part 2

229
4
Advice for Emergency Situations
Warning
The kit must be used in “tyre inflation” mode. Refer to the
instruction manual provided with the kit.
• Inflate to the indicated pressure (see page 30).
• Lower the vehicle and remove the jack.
• Tightly fasten the stud bolts, alternately going from one stud bolt
to one that is diametrically opposite.
As soon as possible, secure the stud bolts with the torque wrench
and tighten them to a torque of 100 Nm.
Warning
The space saver spare wheel does not have a tyre pressure
monitoring sensor (see label on spare wheel tool bag). After
fitting, it is not checked by the system but complies with
international regulations ECE R64/01.
After fitting, we recommend that you go to the nearest Ferrari
Service Network.
Towing
When towing the vehicle, avoid using anchor points that are not
those for the tow hook
A inserted in place B.
• Take the tow hook
A out of the tool bag.
• Tightly screw the tow hook into place
B.
• Release the EPB.
• Release the Park Lock.
Warning
If there is an electrical system failure, release the EPB and Park
Lock manually (see pages 244-246).
Warning
While towing the vehicle, you must comply with Road
Regulations.
"
#