User's Manual

MAKING A SECOND
PHONE CALL
When a phone conversation is active, a
second phone call can be made as
follows:
❒select thenumber/contact fromthe
list of recent calls;
❒select thecontact fromthe
phonebook;
❒press the"Hold" buttonand dialthe
number using the graphic keyboard
of the display.
MANAGING TWO PHONE
CALLS
If two calls are in progress(one active
and one on hold), it is possible to
switch between them pressing the "Call
On Hold" button or to merge the two
calls in a conference pressing the
"Merge calls" button.
NOTE Check whether the phone in use
supports the management of a second
call and the "Conference" mode.
ENDING A CALL
Press the "End" button or the
button on the steering wheel
controls to end a call in progress.
Only the ongoing call is ended and any
call on hold becomes the new active
call.
Depending on the type of mobile
phone, if the ongoing call is ended by
the caller,the callon holdmay not
be activated automatically.
REDIALLING
Tocall thenumber/contact oflast call
made, press the "Redial" button.
CONTINUING A PHONE
CALL
After the engine is switched off, it is still
possible to continue a phone call.
The call continues until it is ended
manually or for a maximum period of
about 20 minutes.
When the system is switched off the
call is transferred to the mobile phone.
ACTIVATION/
DEACTIVATION OF THE
MICROPHONE
During a call the microphone can be
deactivated pressing the
button on
the front panel (or on the steering wheel
controls) or the "Mute" button on the
display.
When the microphone is deactivated it
is still possible to listen to the call in
progress.
Toreactivate themicrophone, press the
corresponding button again.
TRANSFERRING A CALL
The ongoing calls can be transferred
from the mobile phone to the system
and vice versa without ending the calls.
Totransfer thecall, pressthe "Transfer"
button.
24