User's Manual

ManualsBrandsHarman Becker Automotive Systems ManualsElectronicsBluetooth Handsfree Car Kit

To select the * character, press the

Ã button once. To select the + charac-

ter, briefly press the Ã button twice.

To delete individual characters: press

the $ button.

To delete an entire word or number:

press and hold the $ button until the

entire word or number has been deleted.

Using the telephone via the Blue-

tooth

interface

Bluetooth

technology is the standard for

short-range wireless data transmission of up

to approximately 10 metres. Bluetooth

can

be used to exchange vCards or make calls

using a headset or handset, for example.

If your vehicle is equipped with convenience

telephony* and you would like to make calls

using the Bluetooth

interface, be sure that

your mobile phone is neither in the mobile

phone bracket* nor connected to it*. This

may result in a malfunction, depending on the

type of mobile phone.

Activating/deactivating Bluetooth

Select Vehicle Q System Q Blue‐

tooth Q Bluetooth activated.

A tick appears when Bluetooth

is activated.

Mobile phone requirements

For telephony via COMAND's Bluetooth

interface, you require a Bluetooth

-capable

mobile phone.

Not all mobile phones available on the

market are equally suitable. You can obtain

more detailed information about suitable

mobile phones and about connecting Blue-

tooth

-capable mobile phones to

COMAND from your Mercedes-Benz

Service Centre or on the Internet

(www.mercedes-benz.com).

To avoid malfunctions, the mobile phone's

rechargeable battery must always be suffi-

ciently charged.

In preparation for telephoning via the Blue-

tooth

interface you should check the follow-

ing items on your mobile phone (see the

mobile phone operating instructions):

Hands-Free Profile

The mobile phone must support Hands-

Free Profile 1.0 or above.

Certain displays (e.g. the field strength

display or the mobile phone network pro-

vider) appear depending on the supported

version of the Hands-Free Profile.

Bluetooth

visibility

On certain mobile phones, the device itself

must be made "visible" for other devices,

as well as activating the Bluetooth

func-

tion.

Bluetooth

device name

Every Bluetooth

device has a Bluetooth

device name. This device name is freely

definable, but can be identical for all devi-

ces from the same manufacturer. It is a

good idea to choose a personalised name

by which you can identify your mobile

phone clearly.

Telephone*

115

COMAND

* optional

221_AKB; 2; 3, en-GB

bjanott, Version: 2.11.7.7

2009-02-27T14:45:18+01:00 - Seite 115

Summary of content (19 pages)

PAGE 1
2009-02-27T14:45:18+01:00 - Seite 115 Version: 2.11.7.7 Telephone* i To select the * character, press the Ã button once. To select the + character, briefly press the Ã button twice. X To delete individual characters: press the $ button. X To delete an entire word or number: press and hold the $ button until the entire word or number has been deleted.
PAGE 2
21_AKB; 2; 3, en-GB bjanott, 2009-02-27T14:45:18+01:00 - Seite 116 Version: 2.11.7.7 Telephone* 116 Connecting a mobile phone X Switch on the mobile phone and enter the PIN, if necessary – see the mobile phone operating instructions. COMAND X Activate the Bluetooth® functionality on the mobile phone – see the mobile phone operating instructions. Bluetooth® is activated on COMAND as standard.
PAGE 3
221_AKB; 2; 3, en-GB bjanott, 2009-02-27T14:45:18+01:00 - Seite 117 Version: 2.11.7.7 Telephone* Passcode input in COMAND You can enter the passcode in COMAND with the digits in the menu bar or with the telephone keypad. X Input via the menu bar: use the COMAND controller to highlight digits; confirm the selection. or X Input via the telephone keypad: press the respective buttons on the keypad. X To confirm: select ¬ in the menu bar. or X Select the z or ; button on the telephone keypad.
PAGE 4
221_AKB; 2; 3, en-GB bjanott, 2009-02-27T14:45:18+01:00 - Seite 118 Version: 2.11.7.7 Telephone* 118 Rauthorisation RBluetooth® class (e.g. telephone, note- book) COMAND X To close the display showing the details: slide XVY. De-registering (de-authorising) a mobile phone X Select Data/connectionsQBlue‐ tooth telephones. X Select the mobile phone from the list and select Options QDe-authorise. A prompt appears asking whether you really wish to revoke authorisation for this device. X Select Yes.
PAGE 5
221_AKB; 2; 3, en-GB bjanott, 2009-02-27T14:45:18+01:00 - Seite 119 Version: 2.11.7.7 Telephone* 119 Data/connections Call lists Bluetooth® telephones Address book Importing contacts Deleting contacts Incoming calls Calls made Convenience telephony* Using a mobile phone For convenience telephony with COMAND, you require a mobile phone bracket* and a suitable mobile phone.
PAGE 6
221_AKB; 2; 3, en-GB bjanott, 120 2009-02-27T14:45:18+01:00 - Seite 120 Version: 2.11.7.7 Telephone* C SMS menu D Input speller for entering telephone num- ber COMAND E Convenience telephony display Bars = display the current signal strength of the mobile phone network. If all the bars are filled, you have optimum reception. If all bars are empty, there is very poor or no reception at all. Receiver symbol ? shows whether or not a call is in progress or is being currently connected.
PAGE 7
221_AKB; 2; 3, en-GB bjanott, 2009-02-27T14:45:18+01:00 - Seite 121 Version: 2.11.7.7 Telephone* No mobile phone is inserted in mobile phone bracket* COMAND starts telephony via the Bluetooth® interface and searches for the last two mobile phones to have been connected via the Bluetooth® interface. If one of the two mobile phones is found, the telephone basic menu for Bluetooth® telephony (Y page 118) appears. If neither of the two mobile phones is found, the Ready for Bluetooth telephony...
PAGE 8
221_AKB; 2; 3, en-GB bjanott, 2009-02-27T14:45:18+01:00 - Seite 122 Version: 2.11.7.7 Telephone* 122 X To reject: select Reject. X or COMAND X Press the ~ button on the telephone keypad or the multi-function steering wheel. Once you have accepted the call, you can conduct your telephone call using the handsfree system. The call volume can be adjusted (Y page 68). For more information, see the "Functions during a single call connection" section (Y page 123).
PAGE 9
221_AKB; 2; 3, en-GB bjanott, 2009-02-27T14:45:18+01:00 - Seite 123 Version: 2.11.7.7 Telephone* Dial the respective number to listen to your answering machine, for example. X Select DTMF from the telephone basic menu during a conversation.
PAGE 10
221_AKB; 2; 3, en-GB bjanott, 124 2009-02-27T14:45:18+01:00 - Seite 124 Version: 2.11.7.7 Telephone* wheel or select ~ from the telephone basic menu. COMAND Call waiting, toggling and conference connections with several persons22, 23 You can be called by more than one person (call waiting) while you are making a telephone call. In the same way, you can call another party while already on the phone with someone.
PAGE 11
221_AKB; 2; 3, en-GB bjanott, 2009-02-27T14:45:18+01:00 - Seite 125 Version: 2.11.7.7 Telephone* available to you which are described in the "Functions during a single call connection" section (Y page 123). Text messages (SMS)* (convenience telephony*) COMAND Interconnection to create a conference You can interconnect calls which are active and those which are on hold. This permits several parties to hear one another and speak with one another.
PAGE 12
221_AKB; 2; 3, en-GB bjanott, Telephone* 126 COMAND 2009-02-27T14:45:18+01:00 - Seite 126 Version: 2.11.7.7 : New text message (0 symbol for ; = ? A B unread text message) Number of text messages in the inbox folder Outbox Drafts To write a new text message Text message inbox The sender display shows the sender of the messages. If the sender is stored in the COMAND phone book, the name is displayed. Otherwise, the telephone number appears.
PAGE 13
221_AKB; 2; 3, en-GB bjanott, 2009-02-27T14:45:18+01:00 - Seite 127 Version: 2.11.7.7 Telephone* 127 Writing a new text message Select New from the "SMS" menu. COMAND X Entering the message : Input speller Entering the recipient : Recipient of the new text message ; To enter a telephone number using the address book = Input speller X To enter the text message recipient from the phone book: select ; using the COMAND controller. X Select the desired recipient from the phone book (Y page 129).
PAGE 14
221_AKB; 2; 3, en-GB bjanott, 128 Telephone* Deleting a text message25 X Select the desired text message from the text message inbox. X Select Options Q Delete. A deletion prompt appears. X Select Yes. COMAND 2009-02-27T14:45:18+01:00 - Seite 128 Version: 2.11.7.7 using the mobile phone bracket* (convenience telephony*) is activated.
PAGE 15
221_AKB; 2; 3, en-GB bjanott, 2009-02-27T14:45:18+01:00 - Seite 129 Version: 2.11.7.7 Telephone* i If you switch over to another main function (e.g. navigation) while importing data, the import will be cancelled. If you switch to another function while importing vCards from the memory card, the import will not be cancelled. Calling up contacts/details You can call up contacts with the list or by using the input speller. Calling up contacts from a list X Phone book: select Name.
PAGE 16
221_AKB; 2; 3, en-GB bjanott, 2009-02-27T14:45:18+01:00 - Seite 130 Version: 2.11.7.7 Telephone* 130 vehicle speed drops below about 3 km/h, the function is available again. i You can enter address data directly in the COMAND address book. If you store telephone numbers in the phone book, these are saved in the address book. If you store a navigation destination*, COMAND creates an address book entry which includes the complete navigable address data. X Call up the contact (Y page 129).
PAGE 17
221_AKB; 2; 3, en-GB bjanott, 2009-02-27T14:45:18+01:00 - Seite 131 Version: 2.11.7.7 Telephone* RDelete via Bluetooth all X To confirm your selection: press W. A prompt appears asking whether the data should be deleted. X Select Yes. X Search for an address book entry using the ¤ symbol. X Display the details about an entry and highlight the address data field. X i You may only select Navigate if the address data field contains complete, navigable data. This is indicated by the ¤ symbol.
PAGE 18
221_AKB; 2; 3, en-GB bjanott, Telephone* 132 Using call lists COMAND displays lists of calls received (including missed calls) and made during phone operation. i The respective menu item can only be COMAND 2009-02-27T14:45:18+01:00 - Seite 132 Version: 2.11.7.7 selected if calls have already been made or received in COMAND or if the call lists have been imported from the telephone. Selecting an entry from the call list X X Press the S function button. Select Call lists. A menu appears.
PAGE 19
221_AKB; 2; 3, en-GB bjanott, 2009-02-27T14:45:18+01:00 - Seite 133 Version: 2.11.7.7 Navigation system* (introduction) in a number and telephone category, the ; icon will appear in the display. X Select Next (save). An input menu appears with data fields. The data field for the telephone number is filled in automatically. : Data fields for surname, first name and company ; Number category = Telephone category ? Data field for telephone number (filled in X Select Next (save).