UHP Low/High/Embedded Draft text for UHP user guide Harman/Becker reserves the copyright to this document. It must not be copied, communicated or made available to third parties without the written authorisation of Harman/Becker Department Date Name UHP Low/High/Embedded Drawn Check Rel. QME Harman/Becker 01 Initial revision Rev. Change / Note 07.04.2008 Date Draft text for UHP user guide File UHP_SDS_UserGuide_draft_text Printed. 1 of Automotive Systems Name Page 07.04.
Content 1 2 Abstract ......................................................................................................................... 3 1.1 Revision index.......................................................................................................... 3 1.2 Applikable documents .............................................................................................. 3 1.3 Abbreviations .............................................................................................
UHP Low/High/Embedded Draft text for UHP user guide 1 Abstract 1.1 Revision index No. State Version Change Description Changed pages Autor 01 Initial 01 Inital revision All 1.2 Applikable documents Ref. State Version Document Description Autor Harman/Becker reserves the copyright to this document. It must not be copied, communicated or made available to third parties without the written authorisation of Harman/Becker Revision 01 from 07.04.2008 page 3 of 12 UHP_SDS_UserGuide_draft_text.
UHP Low/High/Embedded Draft text for UHP user guide 1.3 Abbreviations Document Description SDS Speech Dialog System Harman/Becker reserves the copyright to this document. It must not be copied, communicated or made available to third parties without the written authorisation of Harman/Becker Revision 01 from 07.04.2008 page 4 of 12 UHP_SDS_UserGuide_draft_text.doc Printed: 07.04.
UHP Low/High/Embedded Draft text for UHP user guide 1.4 Purpose of the document Summarize the draft text which was provided to General Motors to be a base for creating the user guide. 2 Draft text for UHP user guide 2.1 The Speech Dialogue System 2.1.1 Introduction The speech dialogue system enables you to operate some of the mobile phone’s functions by voice input. It recognizes commands and sequences of numbers independently of the person speaking.
UHP Low/High/Embedded Draft text for UHP user guide With the aid of the voice control system, you can operate the mobile telephone very comfortably using the voice input function. Simply activate the speech dialogue system and say the desired command. Once the command has been input, you will be led through the dialogue with the corresponding questions and messages in order to reach the action you require.
UHP Low/High/Embedded Draft text for UHP user guide User: Send Voice Output: Please, say the number to send. User: 123456789 User: Send. The interrupted call will be continued after deactivation of the “Barge In”. 2.1.7 “Dial” Say the telephone number in a normal voice. Recognition is most successful when you pause for at least half a second after every three to five numbers. You can input single digits and block of digits. To input the block of digits you should say the number without pause.
UHP Low/High/Embedded Draft text for UHP user guide • "Cancel” – end the speech recognition session. Example of a Call-dialogue () User: Call. Voice Output: Please say the nametag to call. User: . Voice output: “Do you want to call ?” User: No. Voice output: “Please say the nametag to call?” User: Voice output: “Do you want to call ?” User: Yes. Voice output: Calling You have three attempts to enter a correct voice name.
UHP Low/High/Embedded Draft text for UHP user guide User: Save. Voice Output: Please, say the nametag to save. User: . Voice Output: Please, repeat the nametag to confirm. User: . Voice Output: Saving the nametag. Voice Output: Ending session. Korean digits can not be entered by blocks, but only digit by digit. 2.1.11 Delete Using the "Delete" command from the main menu, you can delete any voice tag.
UHP Low/High/Embedded Draft text for UHP user guide Voice Output (if all nametags displayed): End of directory. Voice Output: Ending session. 2.1.13 “Pair” Using the “Pair” command you can add or delete a device to or from the device list. This allows you to later select the device from the list to start a Bluetooth session (for details see the next chapter). The maximum number of devices in the list is 5. If you add a sixth device it replaces the least recently used one from the list.
UHP Low/High/Embedded Draft text for UHP user guide Voice Output: Do you want to select the device number ? User: Yes. Voice Output: One moment. The system is searching for the selected device. Voice Output: Device number is selected Voice Output: Ending session. 2.1.15 “Voice Feedback” Each word that you say using the speech dialogue system has an appropriate audio feedback which contains some set of words.
UHP Low/High/Embedded Draft text for UHP user guide Voice output: Wrong PIN code. User: 4321, accept. Voice output: Accepted. Ending session. If you enter a wrong PIN you receive the audio message: “Wrong PIN Code” and the system asks for the PIN once more. You have only 3 attempts. After a third unsuccessful attempt you will receive the audio message “Phone not ready”. Then you must enter the PUK code. PUK cannot be entered via the speech dialogue system – it is only possible via the keypad.