® ™ JBL ONBEAT XTREME iPod, iPhone and iPad speaker dock with Bluetooth speaker dock fordocking iPod/iPhone/iPad OWNER’S MANUAL
INTRODUCTION ® CONNECTIONS ™ The JBL OnBeat Xtreme speaker dock provides the ultimate in highquality sound for your iPod, iPhone, iPad or other Bluetooth®-enabled devices. Built-in Bluetooth technology lets you play and control your music wirelessly from anywhere within a 30-foot radius. You can wirelessly stream high-quality audio from Internet radio and even handle phone calls.
English CONNECT AN AUXILIARY DEVICE If you are going to use your JBL OnBeat Xtreme system with another audio source, plug one end of the supplied 3.5mm (1/8") stereo cable into the JBL OnBeat Xtreme Aux In connector, and plug the other end into the audio source’s audio out or headphone out connector. AUX IN VIDEO OUT iTUNES AC IN CONNECT TO iTunes Connect the supplied USB Type Mini B cable to the JBL OnBeat Xtreme USB port and to a USB port on the computer on which your iTunes library is located.
USING YOUR JBL ONBEAT XTREME CONTROLS Power Button Bluetooth button: Press this button to answer a phone call and perform other Bluetooth functions. See Bluetooth Pairing, on page 6; and Receiving a Phone Call from a Bluetooth-enabled Device, and Placing a Phone Call from a Bluetooth-enabled Device, on page 7.
English Remote Control Button Action Function Enter/OK Short press Confirms a selection. Long press Changes the EQ setting (see EQ Settings, on page 9, for details). Short press Acts as the menu button on the docked device. Long press Changes the audio source from the docked device, to Bluetooth, to the auxiliary device. Short press • If the audio is not muted, each press lowers the volume by an increment of 1 (in a range of 1-30).
BLUETOOTH PAIRING Before you can use your JBL OnBeat Xtreme system with a Bluetoothenabled device, you must pair it with that device. NOTE: The maximum distance for Bluetooth functionality is approximately 30 feet. To pair the JBL OnBeat Xtreme system with your device: 1. Make sure your JBL OnBeat Xtreme system is turned on (the Power LED glows white). 2. To place the JBL OnBeat Xtreme unit in Bluetooth Pairing/Discoverable mode, press the Source Select button until the LED flashes blue. 4.
English RECEIVING A PHONE CALL FROM A BLUETOOTH-ENABLED DEVICE 1. Make sure the JBL OnBeat Xtreme system is paired (see Bluetooth Pairing, on page 6). The JBL OnBeat Xtreme system’s built-in microphone lets you use it as a speakerphone. 2. When you hear your Bluetooth-enabled device’s ringtone from the JBL OnBeat Xtreme system, press the Bluetooth button to answer the phone call. • To reject an incoming phone call: Press and hold the Bluetooth button on the JBL OnBeat Xtreme unit for two seconds.
DOCKING AN iPod/iPhone/iPad DEVICE NOTE: When docking an iPod, iPhone or iPad device, you must set the device’s “Shake to Shuffle” feature to “Off.” Otherwise, the JBL OnBeat Xtreme unit’s bass energy can activate the device’s shuffle trigger, causing songs to change unexpectedly. 1. To dock an iPod or iPhone, place the device on the 30-pin connector with the device tilted forward. 2. When the device is firmly seated on the connector, push it all the way back into the dock.
English EQ SETTINGS The JBL OnBeat Xtreme dock has five equalizer (EQ) modes that adjust the tone quality to suit different types of programs: Music (default), Movies, Internet Radio, Chat, or Games, in that order. Use the remote control to change the EQ setting for the active source: 1. Press and hold the Enter button on the remote control. The EQ will advance to the next setting (Movies) and the Source Select LED will flash to indicate that the EQ setting has advanced. 2.
SYNCHRONIZING WITH iTunes NOTE: Before attempting to synchronize your iPod/iPhone/iPad device with iTunes, be sure that both your device and iTunes are updated to the latest software version. 1. Place your iPod/iPhone/iPad device on the JBL OnBeat Xtreme docking connector. Make sure to insert the device all the way onto the connector. 2. Use your computer’s iTunes software to synchronize the device with iTunes. 3. When you’re finished synchronizing, eject the device from iTunes.
English TROUBLESHOOTING SOUND QUALITY Symptom Possible Problem Solution Note No sound (Power button LED is not illuminated) Faulty AC connection Make sure that the JBL OnBeat Xtreme system is connected to a working AC outlet. The Power button LED glows white when the power is on. No sound (Power button LED glows amber.) The JBL OnBeat Xtreme system is in sleep mode. Press the Power button until it glows white. No sound (Power button LED glows white.) The incorrect source is selected.
TROUBLESHOOTING BLUETOOTH PAIRING Symptom Possible Problem Solution Note The audio device does not pair with the JBL OnBeat Xtreme The audio device is not compatible with the JBL OnBeat Xtreme unit. Verify compatibility with manufacturer. The JBL OnBeat Xtreme unit is not powered on. Press the Power button on the JBL OnBeat Xtreme system. The Power button glows white when the unit is on. The JBL OnBeat Xtreme source is not in Bluetooth mode. Press the Source Select button until it flashes blue.
English )&& QRWLFH WR XVHUV DQG SURGXFW VWDWHPHQWV 7KLV GHYLFH FRPSOLHV ZLWK SDUW RI WKH )&& 5XOHV 2SHUDWLRQ LV VXEMHFW WR WKH IROORZLQJ WZR FRQGLWLRQV 7KLV GHYLFH PD\ QRW FDXVH KDUPIXO LQWHUIHUHQFH DQG 7KLV GHYLFH PXVW DFFHSW DQ\ LQWHUIHUHQFH UHFHLYHG LQFOXGLQJ LQWHUIHUHQFH WKDW PD\ FDXVH XQGHVLUHG RSHUDWLRQ IC Warning This device complies with Indusy Canada License-exempt RSS standard(s).
