jbl radial High Performance Loud Speaker Dock for iPod User Guide English Deutsch Français Español Italiano
English Important Safety Instructions Please read the following operation precautions before use: • Read these instructions. • Keep these instructions. • Heed all warnings. • Follow all instructions. • Do Not use this apparatus near water. • Clean only with dry cloth. • Do Not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN THE LIGHTNING FLASH AND ARROWHEAD WITHIN THE TRIANGLE IS A WARNING SIGN ALERTING YOU OF DANGEROUS VOLTAGE INSIDE THE PRODUCT CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER. NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. THE EXCLAMATION POINT WITHIN THE TRIANGLE IS A WARNING SIGN ALERTING YOU OF IMPORTANT INSTRUCTIONS ACCOMPANYING THE PRODUCT.
Introduction to your JBL Radial, High-performance loudspeaker dock for iPod®. The JBL Radial is the latest innovation from JBL, a long time leader in the manufacturing of high-end, professional component audio systems. JBL’s audio heritage combined with continual research has provided the unique technologies included in the JBL Radial. JBL Radial is a complete iPod docking sound system. It is the new centerpoint of your personal entertainment space.
Advanced Technology The JBL Radial combines many proprietary technologies to provide the highest quality sound. The JBL Radial will provide astonishing bass and clear accurate sound from any direction. Halo acousticsTM - The horizontal acoustic level optimization or Halo acoustics design provides a full, rich sound field from any direction. The dual left and right tweeters and down-firing low transducer provides a 360 degree sound field.
General Setup 1) Unpack the JBL Radial and power supply 2) Place your iPod adapter (included with iPod) into docking station 3) Place the iPod into the adaptor 4) Plug power adaptor into jack marked 24Vdc in 5) Plug adaptor into wall outlet 6) If an additional audio source is used, connect source into Aux In 7) If the use of S-Video out to a TV or monitor is desired, connect with S-Video cable 8) Connect the JBL Radial to a computer with the supplied USB cable for sync and charge functions 9) Install suppli
Listening to music from an iPod: A) First locate and place the appropriate corresponding universal iPod adaptor, included with iPod, into JBL Radial iPod docking location, then connect your iPod. B) Press the “Power” button on the rear of JBL Radial. A blue LED will indicate that the unit is on. C) Select and play music through your iPod controls or send commands to your iPod with the JBL Remote.
SYMPTOM POSSIBLE PROBLEM SOLUTION NOTE No power to unit Make sure wall power outlet or power strip has power. Make sure all switches for outlet / power strip are on and that all switches for speaker system are on. Is the LED On? SOUND QUALITY No sound from JBL Radial Incorrect source selection If the LED is not on, power is not getting to your JBL Radial. Try the solutions shown. Ensure that the iPod is properly docked or that the auxillary cable is properly connected to an external audio device.
SYMPTOM POSSIBLE PROBLEM SOLUTION JBL Radial is being overdriven by an amplified audio source. Ensure that the JBL Radial is connected to an appropriate source device. SOUND QUALITY Too much bass or treble Make sure that all signal cables are inserted snugly into receptacles. Volume level may be too high Check volume of source device. Some devices will distort the output signal if the volume is set to maximum. Check the EQ setting on your iPod or source device.
SYMPTOM POSSIBLE PROBLEM SOLUTION Wrong adaptor is used. Ensure correct adaptor is used for your specific iPod model. The iPod is not making full contact with the dock station. Ensure iPod is seated securely into the docking station. Third party accessories may be conflicting with the USB or firwire signal. Make sure you do not have the JBL Radial connected to a USB or firewire hub.