HARMAN KARDON GO + PLAY ™ WIRELESS Wireless portable hi-fi speaker for iPhone/iPod Owner’s Manual TM
. 3. 4. 5. 6. 7. 8. 9. 10. 11. Read these instructions. Keep these instructions. Heed all warnings. Follow all instructions. Do not1.use this apparatus near water. Clean only with a dry cloth. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. Do not install near any heat sources such as radiators, heat registers, stoves or other apparatus (including amplifiers) that produce heat. Do not defeat the safety purpose of the polarized or grounding-type plug.
HARMAN KARDON Welcome GO + PLAY WIRELESS Welcome Package Contents Thank you for purchasing the Harman Kardon Go + Play™ Wireless portable hi-fi speaker for iPhone/iPod. This system has been designed to meet the highest audio-performance standards, and features HARMAN TrueStream, which guarantees peak wireless sound and clarity. The Harman Kardon Go + Play Wireless system will meet all your listening and travel needs, allowing you to immerse yourself in your favorite music wherever you are.
HARMAN KARDON General Setup GO + PLAY WIRELESS General Setup Battery Installation 1. Unpack the Harman Kardon Go + Play Wireless system. 2. Place the nest into the docking station. 3. IMPORTANT: Turn the adjustable knob in the center of the docking station to properly support your specific iPhone/iPod model. 4. Place the iPhone/iPod device into the docking station. 5. Connect the power supply into the “DC In” jack. 6. Plug the adapter into the wall outlet. 7.
HARMAN KARDON Bluetooth Pairing GO + PLAY WIRELESS Listening to Audio from a Bluetooth-Capable Device Listening to Music from an Auxiliary Device 1. Press the Harman Kardon Go + Play Wireless’s “Power” button. The green LED will illuminate. 2. The Harman Kardon Go + Play Wireless unit will automatically enter the Bluetooth pairing mode. 3. Perform a new device search on your Bluetooth-capable device. 4. Select “GO+PLAY WIRELESS” on the device’s pairing list.
HARMAN KARDON Troubleshooting GO + PLAY WIRELESS Symptom Possible Problem Solution Note There is no sound coming from the Harman Kardon Go + Play Wireless unit. No power to unit. Make sure that the wall outlet or power strip has power. Make sure that all switches for outlet/power strip are on and that all switches for the unit are on. If you are not using the AC adapter, make sure that fresh batteries are installed correctly.
HARMAN KARDON Technical Specifications GO + PLAY WIRELESS Technical Specifications Model: Harman Kardon Go + Play™ Wireless Optional batteries for unit: 8 type D alkaline batteries Drivers: Two Ridge and two Hercules™ transducers Power: Tweeters: 2 x 15 watts @ 1% THD Woofers: 2 x 30 watts @ 1% THD Frequency response: 40Hz – 20kHz Input sensitivity: 250mV Dimensions: Length: 20" (500mm) Width: 9" (230mm) Height: 9-1/2" (240mm) Weight: 9.4 lb (4.
