User's Manual

2.2: HARDWARE I/O & CONTROL
GETTING STARTED > HARDWARE
2.2: Hardware I/O And Control
Wi-Fi Indicator
Shows Wi-Fi is operating normally
The indicator also shows Wi-Fi boot status during power up. It stops its timed flash sequence when booted and
available for connections. Then flashes with data activity.
If the WiFi LED keeps flashing it can mean the firmware is not loading into the DSP. Make sure latest firmware is
loaded into the unit and that the DC power connector is properly screwed on.
8L8L8VHU0DQXDO
0(',$5(&8L8LZLWKODWHVW)LUPZDUH
USB Socket for USB Flash Drive - for recording audio
The Soundcraft Ui mixer will record the Master Channel stereo output as a stereo file onto the storage device. See
guide for playback and recording instructions - section 9.0.
/,1(,1
Line level RCA inputs
The RCA inputs feed the Line In L and Line In R channels in the UI mixer.