Manual

Installation and Connections
2. Connect the analog audio and video outputs The Unswitched AC Accessory Outlet
of a satellite receiver, cable TV converter or
television set or any other video source to the
Video 2 or Video 3 Jacks _.
3. Connect the analog audio and video
outputs of a DVD or laser disc alayer to the
will receive power as long as the unit is
plugged into a powered AC outlet,
Finally,whena connectionsare complete,
plugthe Power Cord _ into a nonswitched
120-voltACwall outlet.You'realmost readyto
DVD JacksO_). Whena digital audio con- enjoytheAVR 120!
nectionis usedfor your DVDplayer,the
default connectionis the Coaxial Digital
Input I Jack I_2.However,the connection
mayalso be madeto anyof the Optical _i"E1
or Coaxial _i"1_JDigital Inputs, provided
that the digital input sourceselection is
changedas shownon page23
4. Connectthe digitalaudio outputsof a DVD
player,satellitereceiver,cableboxor HDTVcon-
verterto the appropriateOptical or Coaxial
Digital Inputs _i_i_]
5. Connectthe Video Monitor Output
jackson the receiverto thecompositeor
S-Videoinput of your televisionmonltoror
videoprojector
Video Connection Note:
• Compositeand S-Videosignalsmayonly be
viewec in their nativeformats.
Power Connections
Thisunit isequippedwith two accessoryAC
outlets.Theymaybeusedto power accessory
devices,but theyshouldnot beusedwith high-
currentdraw equipmentsuchas powerampli-
fiers.Thetotal aowerdraw to eachoutlet may
not exceed100watts,
TheSwitchedAC AccessoryOutlet _ will
receivepower only whenthe unit is on.Thisis
recommendedfor devicesthat haveno power
switchor a mechanicapower switchthat may
be leftin the "ON" aosition.
NOTE:Manyaudio andvideo productsgo into
a Standbymodewhen theyare usedwith
switchedoutlets,and cannotbe fully turned on
usinc the outletalonewithout a remotecontrol
command.
15 INSTALLATIONAND CONNECTIONS