AVR 220 Audio/Video Receiver OWNER'S MANUAL harman/kardon AVB 22O : ........ 5(H_P,_ • : SUIOFF m.
AVR 220 Audio/Video Receiver 3 Introduction 4 4 5 SafetyInformation Unpacking FrontPanelControls 7 9 11 14 FrontPanelInformationDisplay RearPanelConnections RemoteControl Functions Installationand Connections 16 18 18 18 19 21 22 24 24 24 25 26 26 26 27 28 29 29 30 31 31 31 SystemConfiguration Input Setup SurroundSetup DelaySettings SpeakerSetup Output LevelAdjustment ManualOutput LevelAdjustment Operation BasicOperation SourceSelection SurroundMode Chart SurroundMode Selection DigitalAudio Playback
Introduction Thank you for choosingHarman Kardon! With the purchaseof a HarmanKardon AVR220 you areabout to beginmanyyearsof listeningenjoyment.TheAVR220 has been custom-designedto provideall the excitement and detail of moviesoundtracksandevery nuanceof musicalselections.With onboard 3olby* Digitaland DTSc_decoding,the AVR220 deliverssix discretechannelsof audio that take advantageof the digital soundtracksfrom the latest DVDand LDreleasesand Digital Televisionbroadcasts.
Safety Information Important Safety Information Verify LineVoltage Before Use YourAVR220 has beendesignedfor usewith 120-voltAC current. Connectionto a linevoltageother than that for which it isintended can createa safetyand fire hazardand may damagethe unit. If you haveanyquestionsaboutthe voltage requirementsfor yourspecificmodel,or about the linevoltage_nyourarea,contactyourselling dealerbeforepluggingthe unit intoa wall outlet.
Front Panel Controls E! [] [] [] [] [] [] [] [] [] [] Main PowerSwitch SystemPowerControl PowerIndicatoc HeadphoneJack SelectorButtons ToneMode SurroundMode Selector TuningSelector TunerBandSelector PresetStationsSelector [] [] [] [] [] [] [] [] [] [] Input SourceSelector FM Mode Selector DigitalOptical 3 Input DigitalCoax3 Jack Video 4 VideoInput Jacks Video 4 Audio Input Jacks BassControl BalanceControl TrebleControl Volume Control [] Main Power Switch: Pressthis button to apply power to the AVR220.
Front Panel Controls [] Surround Mode Selector:Pressthis button to changethe surroundmodeby scrolling through the list of availablemodes.Notethat dependingonthe type of input,some modes are not alwaysavailable.(Seepage25 for more information about surroundmodes. [] Digital Optical 3 Input: Connectthe opticaldigital output of an audioor video productto thisjack.Whenthe Input isnot in use,be certain to keepthe plasticcap installedto avoid dust contaminationthat might degradefuture performance.
Front Panel Information Display AUTO TUNED ST MEM 0PT123 COAX123ANALOG o o o o o o 0 0° ogo.ngo. o o o o oEo. KHz MHz Dt"ID DrlPLII Drl3ST OSD DSP VMAxIF [] [] [] [] [] [] [] [] BitstreamIndicators DTSMode Indicator DolbyDigital Indicator DolbyProLogic II Indicator Dolby3 StereoIndicator OSDIndicator DSPMode Indicator VMAx Mode Indicator [] BitstreamIndicators:Whenthe inputis a c gitalsource,oneof theseindicatorswill liaht to displaythe specifictype of datasignalin use.
Front Panel Information Display [] Memory Indicator: This indicatorflashes when enteringpresetsand other information intothe tuner's memory. [] Stereo Indicator: Thisindicatorlightswhen an :M station isbeingtuned in stereo. [] Tuned Indicator: This indicator lights when a station is being received with sufficient signal strength to provide acceptable listening quality. [] Auto Indicator: Thisindicatorlights when the tuner'sAuto mode isin use.
Rear Panel Connections 0 0 j @@: O 0 _ _ II I TapeInputs TapeOutputs I_) Video1Audio Inputs O AM Antenna (_ Video 1Audio Outputs !_ )VD Audio Inputs :M Antenna t_ CDInputs 1_) 6-ChannelDirect Inputs i_) DigitalAudio Outputs /_ A1/W_Um|NT I I I I>**_ "I' "- "I ***" "I ' "'] .........
Rear Panel Connections I01 Tape Inputs: Connectthesejacksto the PLAY/OUTjacksof an audio recorder. O Tape Outputs: Connectthesejacksto the RECORD/INPUTjacksof an audio recorder. I_) Video 1 Audio Inputs: Connectthese jacksto the PLAY/OUTaudiojackson a VCR or othervideo source. _I AM Antenna: Connectthe AM loop antenna suppliedwith the receiverto theseterminals.If an externalAM antennaisused,makeconnections to the AM andGND terminalsinaccordance with the instructionssuppliedwith the antenna.
Remote Control Functions O PowerOff Button IRTransmitterWindow 0 Program/SPL Indicator _]1 PowerOn Button _11 Input Selectors _]1AVR Selector qi_ AM/FMTunerSelect TestButton SleepButton SurroundMode Selector Night Mode qi_ ChannelSelectButton • Button • Button Set Button qi_ Digital Select • Button NumericKeys (_ TunerMode DirectButton TuningUp/Down I!_ OSDButton MacroButtons TransportControls SkipUp/DownButtons DiscSkipButton PresetUp/Down ClearButton MemoryButton _) Delay/Prev.Ch.
Remote Control Functions IMPORTANTNOTE:TheAVR220's remote may be programmedto control up to eight devices,includingthe AVR220. Beforeusing the remote,it is importantto rememberto pressthe Input Selector Button O that corresponds to the unityou wish to operate.In addition,the AVR220's remoteisshippedfrom the factoryto operatethe AVR220 andmost HarmanKardon CDor DVDplayersandcassette decks.The remoteis also capableof operatinga wide variety of otherproductsusingthe control codes that are part of the remote.
Remote Control Functions DVDor LDplayer,dependingon how the remotehas been programmed. Tuner Mode: Pressthis button when the tuner is in useto selectbetweenautomatic tuning and manualtuning.When the button is pressedso that the AUTOIndicator [] goes out, pressingthe Tuning Buttonsl_)lr_! will movethe frequencyup or down in single-step increments.Whenthe FMband is in use,pressing this button when a station's signal is weak will changeto monauralreception.(Seepage 28 for moreinformation.
Installation and Connections System Installation After unpackingthe unit, and 31acing it on a solid surfacecapableof supportingitsweight,you will needto makethe connectionsto youraudioand videoequipment. Audio Equipment speaker.Similarly,the "positive" or "red" wire shouldbe connectedto like terminalson the AVR220and speaker. Connections We recommend that you use high-quality interconnect cables when making connections to source equipment and recordersto preserve the integrity of the signals.
Installation and Connections 4. Connectthe digital audio outputsof a DVD player,satellite receiver,cable box or HDTVconverterto the appropriateOptical or Coaxial Digital Inputs _I_'ti_!. 5. Connect the Video Monitor Output _) jacks on the receiver to the composite or S-Video input of your television monitor or video projector Video Connection Note: • Composite and S-Video signals may only be viewec in their native formats.
System Configuration When all audio,video andsystemconnections havebeenmade,therearea few configuration adjustmentsthat mustbe made.A few minutes spentto correctlyconfigureandcalibratethe unit will greatlyadd to your listeningexperience.
System Configuration Youare now readyto power up the AVR220 to beginthesefinal adjustments. 1. Plugthe Power Cable i_) intoan unswitchedAC outlet. 2. Pressthe Main Power Switch [] in until it latchesandthe word "OFF" on the top of the switchdisappearsinsidethe front panel. Notethat the Power Indicator [] will turn amber,indicatingthat the unit is in the Standbymode. 3. Removethe protectiveplasticfilm from the front-panellens.If left in place,the film may affectthe performanceof yourremote control. 4.
System Configuration Input Setup Thefirst step in configuringthe AVR220 is to selectan input.Thismay be done by pressing the front panel Input Source Selector [] untilthe desiredinput'snameappearsmomentarily in the Main Information Display l_l, and the greenLEDlights next to the input's name in the front panel Input Indicators F_"_. Theinput mayalso be selectedby pressing the appropriateInput Selector 41_O on the remotecontrol.
System Configuration mon distancebetweenthe front andsurround speakersthat may causethe arrivalof frontchannelsoundsto becomedisconnectedfrom surround-channelsounds, Toresynchronizethe front and surroundchannels,follow thesesteps: 1. Measurethe distancefrom the listening positionto the front speakers, 2. Measurethe distancefrom the listening positionto the surrouncspeakers, 3. Subtractthe distanceto the surroundspeakersfrom the distanceto the front speakers, a.
System Configuration It is easiestto enterthe proper settingsfor the speakersetupthrough the SPEAKER SETUP menu(Figure5). If that menu is not alreadyon yourscreenfrom the prior adjustments,pressthe OSDButton _ to bring up the MASTER MENU (Figure1),and then pressthe • Button _ twice so that the cursor is on the SPEAKER SETUP line.At this point, pressthe Set Button _ to bring upthe SPEAKER SETUP menu (Figure5).
System Configuration When al speakerselectionshavebeen made, pressthe v Button _ until the on-screenI_ cursorpointsto I_ET UI_N T 0 I'IE NU and pressthe Set Button _ to returnto the PIASTER MENU. left surround(LS)and right surrounc (RSI speakersareset for sma . anda subwooferis set, asshown by the box with the abbreviation ........ which standsfor "low-frequency effects:' 2. Adjustthe volumeso that it is at - "l.5dB, as shown in the on-screendisplayor Main Information Display [/_lJ.
System Configuration noisewill moveto the next channel.Note f that the color changesarefor your information,but you do not needto adjust anything,as EzSetwill do all the work. • While adjustmentsare being made,the red LEDunderthe AVR Selector O will flash.This is normal,and indicates that EzSetis operating. 7.After the test noisehascirculatedonce through eachchannel,it will sendthe tone to eachchannelonceagain,to verify the settings, 8. After two complete circulations of the tone, the levels are set.
System Configuration Additional Input Adjustments After oneinput hasbeenadjustedfor surround mode,digital input (if any),speakertype,and output levels,go backto the I N PU T SETUP line on the MASTER MENU and enterthe settingsfor eachinput that you will use.
Operation Basic Operation Onceyou havecompletedthe setupand configurationof the AVR220, it is simpleto operateandenjoy.Thefollowing instructions will helpyou maximizethe enjoymentof your new receiver: Turning the AVR220 On or Off • Whenusingthe AVR220for the first time,you mustpressthe Main Power Switch [] on the front panelto turn the uniton. Thisplacesthe unit ina Standbymode,as indicatedbythe ambercolorof the Power Indicator ll_.
Operation Surround Mode Chart MODE FEATURES DELAYTIME RANGE DOLBYDIGITAL Available only with digital input sources encoded with Dolby Digital data. It provides up to five separate main audio channels and a special dedicated Low-Frequency Effects channel. Center:0 ms - 5 ms Initial Setting- 0 ms Surround:0 ms -15 ms Initial Setting- 0 ms DTS Availableonly with digital input sourcesencodedwith DTSdata.
Operation Surround Mode Selection One of the mostimportantfeaturesof the AVR220 is its abilityto reproducea full multichannelsurroundsoundfield from digital sources,analog matrix surround-encoded programsand standardstereoprograms.In all, a total of fifteen listeningmodesareavailable on the AVR220. Selectionof a surroundmodeis basedon personaltaste,aswell asthe type of program sourcematerialbeing used.
Operation When playinga digital sourcesuchas DVD,first selectthe inputusingthe remoteor front panel controlsas outlined in this manual.Next,select the digital sourceby pressingthe Digital Input Selector Button l[l_] and then using the A/v Buttons _(_it on the remoteor the Selector Buttons[] on the front panelto chooseanyof the 0 PT T CA L or C 0 AX T AL inputs,asthey appearin the Main Information Display [], the Digital Input Indicators[][] or the on-screendisplay.
Operation IMPORTANTNOTESON DIGITAL PLAYBACK: 1.Whenthe digital playbacksourceisstopped, or ina _ause,:ast:orward or ChapterSearch mode,the digital audio data will momentarily stop,and the channelpositionletters insidethe Speaker/Channel Input Indicators [] will flash.This isnormaland doesnot indicatea problemwith either the AVR220 or the source machine.TheAVR220 will return to digital playbackas soonasthe data is availableanc when the machineis in a standard playmode. 2.
Operation the next station, 3ressthe button again, f the ST ER E0 Indicator [] is not illuminated, tap the Tuning Selector Button 17tI_) to advanceonefrequencyincrementat a time, or pressand hold it to locatea specificstation, Whenthe T UN ED Indicator [] lights,the station is properlytuned and shouldbe hearc with clarity, 5. Stationsmay also be tuned directlyby pressing the Direct Button I_), and then pressing the Numeric Keys _ that correspondto the station'sfrequency.
Operation Once the menu appears on your video screen, use the A/v buttons li_ to move the onscreen I_ cursor so that it is next to the channel that you wish to adjust. Then, use the ,/I_ Buttons l_tl_i) to raise or lower the output evel. %member, the goal is to have the output evel at each channe be equal when heard at the listening position.
Advanced Features TheAVR220 isequippedwith a numberof advancedfeaturesthat addextra flexibilityto the unit's operation.While it isnot necessary to usethesefeaturesto operatethe unit, they provideadditionaloptions that you maywish readsVF D F UL L. Within five seconds,press the front panelSelector Buttons [] until the ....................................... that point, pressthe Set Button [] againto enterthe setting. to use.
Advanced Features theAVR 220 is turned off. Oncethe unit is turned off, the semi-OSDdisplayswill remain activated,evenif they wereswitched off for the previouslisteningsession. Tochangethe length of time that the semi-OSD displaysremainon the screen,go to the ADVANCED SELECT menuas outlined earlier,and pressthe A/v ButtonsI[_IP_ as needed until the on-screen• cursoris next to the SEMI- OSD TIME OUT line. Next, pressthe _1t• Buttons li_]ti_i) until the desiredtime in secondsis displayed.
Programming the Remote TheAVR220 is equippedwith a powerful remotecontrol that will control not only the receiver'sfunctions,but also most popular brandsof audio and video equipment,including CD players,cassettedecks,TVsets,cable boxes, VCRs,satellite receiversand other hometheater equipment.Oncethe AVR220's remote is programmedwith the codesfor the productsyou own, it is possibleto eliminate mostother remotesandreplacethem with the convenience of a single,universalremotecontrol.
Programming the Remote Macro Programming Macrosenableyouto easilyrepeatfrequently usedcombinations of commands with the press of a singlebutton on the AVR220 remotecontrol. Once3rogrammed,a macrowill sendout up to 19different remotecodesin a 3redeterminedsequentialorder,enablingyou to automatethe processof turning on your system, changingdevices,or othercommontasks.
Programming the Remote buttonswhen operatingmostTVsets,VCRsor cableboxes.TheChannelUp/Downindicationis printeddirectlyon the remote.Formanystandard CDplayers,cassettedecks,VCRsanc DVD functions,the standardfunction iconsare printedon top of the buttons. :or someproducts,however,the function of a particularbutton does not follow the commanc printed on the remote. In orderto seewhich function a button controls,consultthe Function _isttableson pages37 and38.
Programming the Remote NOTE:Toremovethe ChannelControlPunchThroughandreturnthe remoteto its originalconfiguration,repeatthe stepsshown above. However,pressthe VIDI/VCR Input Selector in Steps1 and3. TransportControl Punch-Through TheAVR220's remotemay be programmedto operatesothat the TransportControl Functions_) (Play,Stop,FastForward,Rewind, Pauseand Record)for a VCR,cassettedeck, DVD or CDwill operatein conjunctionwith oneof the otherdevicescontrolledbythe remote.
Function List No, Button Name AVR Function DVD CD/CDR Tape VCR(VID1) TV (VID1) CBL(VID3) SAT(VID3) 1 Power Off PowerOff PowerOff PowerOff PowerOff PowerOff PowerOff PowerOff PowerOff 2 Power On PowerOn PowerOn PowerOn PowerOn PowerOn PowerOn PowerOn PowerOn 3 Mute Mute Mute Mute Mute Mute Mute Mute Mute 4 AVR AVRSelect VCRSelect TVSelect VlD3Select Left Left Left Left Channel+ Channel+ Channel+ 5 DVD DVDInput Select 6 CD CDInput Select DVDSelect 7 8
Function List (continued) Button Name AVR Function DVD CD/CD-R 46 Direct Clear DirectTunerEntry Clear Clear 47 Preset Up PresetTuneUp SlowForward 48 Tune Down TuneDown PrevChapter TrackIncrement 49 OSD OSD 50 51 D.
Setup Code Table: TV Manufacturer/Brand Setup Code Number A MARK ADMIRAL AKAI AMPRO ANAM AOC BLAUPUNKT BROKSONIC CANDLE CAPFHART CENTURION CENTRONIC CITIZEN CLASSIC CONCERTO CONTFC CORANDO CORONADO CRAIG CROWN CURTISMATHFS CXC DAFWO0 DAYTRON DIGILINK DYNASTY DYNATFCH FLFCTROHOMF EMERSON FUNAI FUTURFTFCH GF GOLDSTAR GRUNDIG HALLMARK HARMANKARDON HITACHI INFINITY INKFL JBL JCPFNNFY JFNSFN JVC KAWASHO KFC KFNWOOD KMC KTV LLOYTRON LODGFNFT LOGIK LUXMAN LXI MAGNAVOX MARANTZ MATSUI MFMORFX 103 192 123 164 045
Setup Code Table: TV (continued) METZ MGA MINERVA MITSUBISHI MTC NATIONAL NEC NIKEI ONKING ONWA OPTONICA ORION PANASONIC PHILCO PHILIPS PIONEER PORTLAND PROSCAN PROTON QUASAR RADIOSHACK RCA REALISTIC RUNCO SAA SAMPO SAMSUNG SANYO SCOTT SEARS SHARP SIEMENS SIGNATURE SONY SOUNDESIGN SPECTRICON SSS SYLVANIA SYMPHONIC TANDY TATUNG TECHNICS TECHWOOD TEKNIKA TELERENT TERA THOMSON TMK TOSHIBA TOTEVlSION VIDEOCONCEPTS VlDTECH WARDS YAMAHA YORK YUPITERU ZENITH ZONDA 40 084 115 123 128 084 077 115 123 175 176 148 17
Setup Code Table: VCR Manufacturer/Brand Setup Code Number AIWA AKAI AMPRO ASA AUDIODYNAMICS BROKSONIC CANDLE CANON CAPFHART CITIZEN CRAIG DAFWO0 DAYTRON DBX DYNATFCH EMERSON FISHER FUNAI GF GOVIDEO GOLDSTAR HARMANKARDON HITACHI JCPFNNFY JFNSFN JVC KFNWOOD LLOYD LXl MAGIN MAGNAVOX MARANTZ MFMORFX MGA MITSUBISHI MULTITFCH NAD NATIONAL NFC NORDMFNDF OPTIMUS ORION PANASONIC PHILCO PHILIPS PORTLAND PULSAR QUASAR RADIOSHACK RCA REALISTIC 040 048 076 134 018 110 134 135 094 134 045 017 094 018 040 013 017 040
Setup Code Table: VCR (continued) SALORA SAMSUNG SANSUI SANYO SCOTT SEARS SHARP SONY SOUNDESIGN SYLVANIA SYMPHONIC TANDY TASHICO TATUNG TFAC TFKNIKA THOMAS TMK TOSHIBA TOTFVlSION UNITFCH VECTORRESEARCH VIDEOCONCEPTS VlDFOSONIC WARDS YAMAHA ZENITH 020 045 048 017 110 017 129 080 040 040 040 017 134 048 040 040 040 013 112 045 045 018 018 045 040 018 040 095 105 109 116 147 020 112 020 156 129 040 048 155 040 045 112 040 048 076 083 42 SETUPCODES
Setup Code Table: CD Manufacturer/Brand Setup Code Number ADCOM AIWA AKAI AUDIOTFCHNICA AUDIOACCFSS AUDIOFILF BSR CALIFORNIA AUDIO CAPFTRONIC CARRFRA CARVER CASIO CLARINFTTF DFNON EMERSON FISHER FRABA FUNAI GF GFNFXXA GOLDSTAR HAITAI HARMANKARDON HITACHI INKFL JCPFNNFY JFNSFN JVC KFNWOOD LOTTF LUXMAN LXI MAGNAVOX MARANTZ MClNTOSH MCS MITSUMI MODULAIRF NAD NAKAMICHI NFC NIKKO ONKYO OPTIMUS PANASONIC PHILIPS PIONEER PROTON 063 072 050 053 125 211 044 015 070 087 136 117 122 187 052 055 117 126 164 108 016
Setup Code Table: CD (continued) RCX REALISTIC SANSUl SANYO SCOTT SHARP SHERWOOD SONY SOUNDSTREAM SYMPHONIC TAEKWANG TEAC THETADIGITAL TOSHIBA VECTORRESEARCH VICTOR WARDS YAMAHA YORK 169 058 047 033 108 058 003 103 124 059 177 011 039 013 087 120 095 019 122 093 081 068 095 104 134 157 082 095 105 172 168 108 164 166 105 041 115 114 058 116 151 105 118 159 133 132 167 180 181 139 163 205 206 207 208 058 085 086 106 107 110 121 137 146 154 074 097 151 155 173 053 061 135
Setup Code Table: Tape Manufacturer/Brand HARMANKARDON Setup Code Number I 001 Setup Code Table: Audio HARMAN KARDON I 001 Setup Code Table: DVD Manufacturer/Brand APEXDIGTAL )ENON GE GOLDSTAR 4ARMANKARDON JVC _G VIAGNAVOX VIARANTZ VIITSUBISHI _IAD ONKYO 3ANASONIC 3HILIPS _IO_IEER _ROCEED 3ROSCAN qCA SAMSUNG S4ARP SONY THOMSON TOSHIBA YAMAHA ZENITH Setup Code Number 061 019 051 003 004 OO5 O01 006 005 055 064 O56 O59 023 O62 009 048 024 030 044 056 041 065 060 003 004 003 004 053 054 028 043 045 003
Setup Code Table: SAT Manufacturer/Brand Setup Code Number ALPHASTAR ALPHASTAR DBS ALPHASTAR DSR BIRDVlEW CHANNELMASTER CHAPARRAL ClTOH DRAKE DXANTENNA ECHOSTAR ELECTRO HOME FUJITSU GENERAL INSTRUMENT HITACHIDBS HOUSTON TRACKER HUGHES JANIEL JERROLD KATHREIN LEGEND MACOM MAGNAVOX MEMOREX NEXTWAVE NORSAT OPTIMUS PANASONIC PANASONIC DBS PANSAT PERSONAL CABLE PHILIPS PICO PRESIDENT PRIMESTAR RCA REALISTIC SAMSUNG SATELLITE SERVICE CO SCIENTIFIC ATLANTA SONY STARCHOICEDBS STARCAST SUPERGUIDE TEECOM TOSHIBA UN
Setup Code Table: CBL Manufacturer/Brand Setup Code Number ABC ALLEGRO AMFRICAST ARCHER BFLCOR CABLESTAR CITIZEN COLOURVOICE DIGI EAGLE EASTERN FLFCTRICORD EMERSON FOCUS G.I.
Setup Code Table: CBL (continued) REMBRANT SAMSUNG SCIENTIFIC ATLANTA SEAM SIGNATURE SPRUCER STARCOM STARGATE TAND¥ TELECAPATION TEXSCAN TFC TIMELESS TOCOM UNITEDCABLE UNIVERSAL VlDEOWA'/ VlEWSTAR ZENITH ZENTEK 032 072 183 121 001 053 002 120 024 028 036 122 123 170 011 033 124 019 065 116 186 203 188 081 177 189 011 163 205 034 039 042 211 025 086 089 125 211 48 SETUPCODES 113 190
Troubleshooting Guide YourAVR220 receiverhas beendesignedto providemanyyearsof trouble-freeservice.In the eventthat you are experiencingdifficulties,pleasecheckthe suggestionsbelow for a possiblesolutionto your problem.Additional information on the AVR220, includingupdated informationand userhints, is available from our Website at www.harmankardon.com.
Technical Specifications Audio Section StereoMode ContinuousAveragePower(FTC) FM Tuner Section 55 Watts perchannel,@ < 0.07% THD,20Hz- 20kHz, both channelsdriven into8 ohms Five-ChannelSurroundModes PowerPerIndividualChannel FrontL&Rchannels: 45 Watts perchannel @ < 0.07% THD,20Hz-2OkHzinto8 ohms Centerchannel: 45 Watts @ < 0.07% THD,20Hz-2OkHzinto8 ohms Surroundchannels: 45 Watts perchannel @ < 0.
Notes 51 NOTES
harman/kardon It A HarmanInternational Company 250 Crossways Park Drive,Woodbury, New York 11797 www.harmankardon.com @ 2001 Harman Kardon, Incorporated Part No.
