Owner`s manual

24
OPERATION
Programming a Playlist
You may program a playlist consisting of only a single audio track, or
of all folders on the media, or anything in between.
• File level: If you have opened all folders and are viewing the
individual files, press the Disc Menu Button to display the menu.
Highlight the “Playlist” option, and press the
›
Button to continue.
A new dropdown menu will appear. Choose “Add to Playlist”, and
another dropdown menu will appear. Select the option of adding
only the current file, all files in the folder or selected files in the folder
to the playlist.
If you choose the “Select” option, a checkbox will appear above
each file icon. Use the Navigation Buttons to highlight the checkbox
for those files you wish to add to the playlist and press the OK
Button to make the selection. Press the OK Button when a checked
file is selected to remove it from the playlist.
• Folder level: Highlight the desired folder and press the Disc Menu
Button to display the menu. Highlight the “Add to Playlist” option and
press the OK Button. At the next submenu, select the "All" option
and press the OK Button. The entire contents of the folder will be
added to the playlist.
NOTE: Only one playlist may exist at a time on the BDP 10, and the
playlist will be erased when the disc drawer is opened or the BDP 10
is turned off. Only MP3 and WMA files may be added to a playlist.
• View or edit playlist: You must open a folder and change to the
file level. With any file highlighted, press the Disc Menu Button.
Use the
¤
Button to highlight the “Playlist” option, then press the
›
Button. At the new dropdown menu, highlight the “View Playlist”
option and press the OK Button. The screen will display the icons for
all files in the playlist.
NOTE: The playlist page is not labeled. If all files in the current
folder were added to the playlist, the screen may appear the same.
However, pressing the Disc Menu will offer different options, as
described below.
• Remove files from playlist: Follow the instructions above to
view the playlist. Then press the Disc Menu to display the playlist
dropdown menu. Highlight the “Playlist” option, then press the
›
Button. When the “Remove From Playlist” message appears, press
the
›
Button again. Select to remove the current file, all files or a
selection of files, then press the OK Button.
If you choose the “Select” option, a checkbox will appear above
each file icon. Use the Navigation Buttons to highlight the checkbox
for those files you wish to remove from the playlist and press the OK
Button to remove the check mark. Press the OK Button when an
unchecked file is selected to add it back to the playlist.
• Shuffle playlist (random play): Press the Disc Menu Button to
display the playlist dropdown menu. Highlight the “Set Play Mode”
option, then press the
›
Button. Highlight either “Normal” or
“Shuffle” and press the OK Button to activate the play mode.
• Repeat playlist: Press the Disc Menu Button to display the playlist
dropdown menu. Highlight the “Set Audio Mode” option, then press
the
›
Button. Highlight the “Repeat” option to repeat the current
file continuously, or the “Loop” option to repeat the entire playlist
continuously until you manually stop playback. Press the OK Button
to activate the audio mode. Selecting the “None” option ends the
repeat mode, and playback will stop when the end of the playlist is
reached.
NOTES ON MP3 AND WMA PLAYBACK:
• During playback, the front-panel display will show the elapsed time
of the track being played.
• Due to the differences in various versions of the MP3 and WMA
formats, and the many differences between the CD-R machines
used to record discs on a computer, it is possible that some discs
may not play on the BDP 10 even though they will work on a
computer. This is normal and does not indicate a fault with the
unit.
• When a multisession disc with both standard CD audio and MP3
or WMA content is in use, the BDP 10 will play only the CD audio
sections of the disc.
• If a disc containing MP3, WMA and/or JPEG files is created in
more than one session, the BDP 10 may not recognize files
added during the later sessions, especially if the disc was finalized
after the first session.
• When a disc with multiple folders is playing, only tracks from one
folder can be displayed and played at a time.
• Only stereo-audio playback is available for MP3 and WMA discs.
JPEG Playback
The BDP 10 is capable of recognizing and displaying JPEG still-image
files. Navigate JPEG folders and files similarly to navigating audio files.
• Expand folder: Highlight it and press the OK Button, or press the
Disc Menu Button and select the “Open” option, then press the OK
Button.
• Collapse folder or return to previous menu: Press the Return
Button.
• Select file for viewing: Highlight it and press the OK Button, or
press the Disc Menu Button and select the “Play” option, then press
the OK Button.
• Skip forward or backward by file: Press the Previous or Next
Button.
• View image properties: If the information is available, highlight the
image file and press the Disc Menu Button. Select the “Properties”
option and press the OK Button. A popup screen will display a
thumbnail view of the image, along with detailed information about
its size, when it was taken, the camera used and the camera’s
settings, if the information is stored with the file. To clear the
information from the screen, press the Return Button.