Operation Manual

BDS 335/635 System

Troubleshooting

Problems Solutions

The system does not power up (the Power indicator is not lit) • Check whether the system’s Power cord is properly plugged into the

system’s AC Power connector.

• Check that the Power cord is plugged into a working AC outlet. If the

outlet is controlled by a switch, make sure the switch is set in the ON

position.

• Check that the system’s main power switch (located on the rear panel)

is in ON position.

Sound plays through the speakers, but there is no TV picture • Check the HDMI connection between the system and the TV.

• Check the HDMI connection or Component Video connection between

the source device and the BDS system.

• Check that the TV is turned on and is set to the proper input source.

• Unplug the HDMI cable from the TV and plug it back in again.

There is a constant hum in the sound • Check that all input cables are plugged all the way into their connectors.

• Check that all cables are at least 10 ft (3.3m) from fluorescent lights.

• Check that all cable connectors are clean. If necessary, wipe them with a

cloth slightly moistened with alcohol.