Owner`s manual

Instructions for Users on Removal and Disposal of Used Batteries.

Specifications of Included Battery Types.

These symbols shown on the product or the packaging or in the manual or separate

information sheet mean that the product itself, as well as the batteries included or built

into the product, should never be thrown away with general household waste. Take them

to applicable collection points, where proper treatment, recycling and recovery takes

place, in accordance with national or local legislation, or European Directives 2002/96/

EC and 2006/66/EC.

Correct handling of the product and batteries to be disposed saves resources and

prevents possible negative effects on the environment or human health.

The batteries included with your equipment may be alkaline, carbon zinc/manganese

or lithium (button cells) type. All types should be disposed of according to the above

instructions.

To remove the batteries from your equipment or remote control, reverse the procedure

described for inserting batteries in the owner’s manual.

For products with a built-in battery that lasts for the lifetime of the product, removal

may not be possible for the user. In this case, recycling or recovery centers handle the

dismantling of the product and the removal of the battery. If, for any reason, it becomes

necessary to replace such a battery, this procedure must be performed by authorized

service centers.

BDT 3/BDT 30

Important Safety Instructions

This Class B digital apparatus complies with

Canadian ICES-003. For models having a power

cord with a polarized plug:

CAUTION: To prevent electric shock, match wide

blade of plug to wide slot, fully insert.

For Canadian Model

Cet appareil numérique de la classe B est

conforme à la norme NMB-003 du Canada. Sur

les modèles dont la ﬁche est polarisee:

ATTENTION: Pour éviter les chocs électriques,

introduire la lame la plus large de la ﬁche dans

la borne correspondante de la prise et pousser

jusqu’au fond.

CAUTION: This product uses a laser system. To prevent direct exposure to the laser beam,

do not open the cabinet enclosure or defeat any of the safety mechanisms provided for

your protection. DO NOT STARE INTO THE LASER BEAM. To ensure proper use of this

product, please read the owner’s manual carefully and retain it for future use. Should

the unit require maintenance or repair, please contact your local Harman Kardon service

center. Refer servicing to qualiﬁed personnel only.

For Canadian Model