Operation Manual

8 FRONT PANEL INFORMATION DISPLAY
Front Panel Information Display
O Record Indicator: This indicator lights
when the unit is making a recording and flashes
during the preparations for recording.
P MP3 Playback Indicator: These indicators
will light when either of the decks is playing a
disc that contains MP3 data.
Q R/RW Indicator: This indicator shows which
type of recordable disc is present in the Record
Deck
% . When a CD-R disc is present, only the
R is lit. The RW lights when an erasable CD-RW
disc is in use.
R Sample-Rate Converter: This indicator
lights when the Sample-Rate Converter is in use
to change the digital sample rate when the
incoming signal is not the standard 44.1kHz
used by standard CDs.This is an automatic func-
tion and does not require any user intervention.
S Time Indicator: This indicator lights in con-
junction with one of the time indicators
TVW to show which of the time status
modes is active.
T Remaining-Time Indicator: This indicator
lights when the Time/Message Display F
shows the time remaining on a disc or on a
track.
U Record Time Indicator: This indicator
lights in conjunction with the REMAIN
T and
TOTAL
V indicators or the TRACK W indica-
tor during a recording to show that the time
figure shown in the Time/Message Display
F is either the time remaining on the disc or
the time elapsed for the current track.
V Total Time Indicators: These indicators
light when the Time/Message Display F
shows the total time of all tracks on a disc (in
stop mode) or the total remaining time (during
play).
W Track Time Indicators: These indicators
light when the Time/Message Display
F
shows the running or remaining time of the indi-
vidual track being played. Moreover the number
of the track actually selected is shown under
these indicators.
X Digital Record Level Status Indicator:
During a digital recording, this indicator shows
ADRLC when the record level is controlled auto-
matically, and DRLC when you may control it
manually. See page 23 for more information on
record levels.
Y Front Input Indicator: This indicator lights
when the front panel Optical Digital
^ or
Coaxial Digital
& inputs are the source for
a recording.
Z Input Indicators: These indicators light to
display which input source is in use.