DVD-519 H 5.1 HOME CINEMA CENTRE WITH MPEG4 DVD PLAYER, FM RADIO and USB SLOT User Manual For information and support, www.lenco.eu UM_DVD-519-H_GB V1.
Table of content What’s in the box? ...................................................................................................... 3 Safety Precautions ..................................................................................................... 4 Exploring the device ................................................................................................... 7 Front view ...............................................................................................................
Dear customer, Thank you for purchasing this Lenco product. Quality and usability is our top priority. In order to let you fully enjoy this product we manufactured this product using high quality standards, materials, components and care. What’s in the box? Our factory assembles the content of the box with the utmost care. If unfortunately an accessory is missing in the box, please contact your dealer as soon as possible.
Safety Precautions IMPORTANT SAFETY INSTRUCTIONS - READ CAREFULLY BEFORE USE. CAUTION: TO PREVENT ELECTRICAL SHOCK, DO NOT REMOVE ANY COVER SCREWS. THERE ARE NO USER SERVICEABLE PARTS INSIDE. REQUEST A QUALIFIED SERVICE PERSON TO PERFORM SERVICING. This symbol indicates that there are important operating maintenance instructions in the user manual accompanying this unit. This symbol indicates that dangerous voltage is present within this unit constituting a risk of electric shock or personal injury.
SAFETY PRECAUTIONS (continued) This unit has been produced according to all current safety regulations. The following safety tips should safeguard users against careless use and the dangers connected with such use. Although this unit has been carefully manufactured and rigorously checked before leaving the factory, as with all electrical appliances, it is possible for problems to develop.
SAFETY PRECAUTIONS (continued) Scratched discs If your disc is badly scratched, it will not play. You may be able to repair the disc if you use a disc polisher. Cleaning the Lens If the lens becomes dirty, it may cause a skipping of sound during DVD / CD operation. Clean the lens with a commercially available lens cleaner and blower or carefully wipe it with a soft dry cloth.
Exploring the device Front view Back view 1. Standby Button 2. USB Port 3. Remote Control Sensor 4. Information Display 5. Eject Button 6. Stop Button 7. Volume Knob 8. Play/Enter 9. Previous/Next 10. Disc Tray 11. Component out 12. Video out 13. FM Antenna socket 14. L/R Audio input 15. 5.1 speaker output 16. Power ON/OFF switch 17. Power cable 18. HDMI Output 19. Coaxial Output 20. S-Video Output 21. Optical Output 22.
Exploring the remote control Standby button: Press this button to turn on the unit. When the unit is already on, press this button to place it in standby mode. DVD button: Press this button to enter DVD mode. USB button: Press this button to enter USB mode. AUX IN: Press this button (audio) to enter AUX IN mode. FM button: Press this button to enter FM mode. Menu / Search button: In DVD mode: Press this button to go to the DVD menu. (not every disk supports this function).
Time / Frequency button: Press this button to display disc information. In FM mode press this button to enter the frequency. Subtitle / Save button: In video mode press this button to select the subtitle (if supported). In FM mode press this button to save a FM frequency. Angle button: Press this button to change the viewing angle (if supported by the media). L/R/Language button: During CD / VCD playback press this button to select mono / stereo mode.
Installing the device 1. Place the DVD player on a stable surface. 2. Place the speaker on a stable surface (ear height). The subwoofer should be placed on the floor. For optimal sound, the speakers should be placed under the following assembly. Marginal note: 1: Front left speaker (FL) 2: Center speaker (Cen) 3: Front right speaker (FR) 4: Rear right speaker (SR) 5: Rear left speaker (SL) 6: Subwoofer (Sub) 3.
5. Connect the power cable (17) to the AC wall outlet.
Installing the remote control 1. Open the battery cover 2. Insert the batteries Note: Keep the polarization of the batteries in mind. 3.
Basic operation Turning the unit on and off To turn on the main power of the unit place the power switch (16) on the back side of the unit in on position. The unit is now in standby mode. The unit can be turned on in two ways: Press the standby button on the remote control. Press the standby button (1) on the unit. While operating you can turn the unit into standby mode in two ways: Press the standby button on the remote control. Press the standby button (1) on the unit.
Playing a disc Turn the unit on 1. Enter DVD mode by pressing the DVD button on the remote control. 2. Press the eject button on the remote control or the eject button on the main unit (5) to open the disc tray. 3. Place the disc in the disc tray. 4. Press the eject button on the remote control or the eject button on the main unit (5) to close the disc tray. The unit will now start to read the disc content and start playing the disc content automatically. 5.
Adjusting Subtitles During playback mode press the sub. button on the remote control to change the subtitle language. Note: Not every disc supports this function. Repeat function During playback press the repeat button on the remote control to activate the repeat function. The display will show the active repeat mode: Chapter: repeat the current chapter Title: repeat the current title All: repeat the complete disc content Repeat a specific section It is possible to repeat a specific part of a disc.
Program function It is possible to create a playlist of certain fragments of a disc and play it in a desired order. During playback press the program button on the remote control to open the program menu. Enter the title number in the TT box. Enter the chapter number in the CH box. Once the programming is complete, press start to activate the playlist. To cancel the playlist press the program button on the remote control, the program menu will open. In this menu press stop to cancel the playlist.
CD Playback Stop playback During playback press the stop button on the remote control or the stop button on the main unit (6) to temporary stop the playback. Press the play/enter button on the remote control or the play button on the main unit (8) to resume the playback. To completely stop the playback, press the stop button on the remote control or the stop button on the main unit (6) twice. Pause playback During playback press the pause button on the remote control to pause the playback.
Repeat a specific section It is possible to repeat a specific part of a disc. During playback press the REP.AB button on the remote control once to set the begin point of the part that needs to be repeated. When this point is set A will be shown. Press the REP.AB button on the remote control again to set the end point of the part that needs to be repeated. When this point is set A-B will be shown. To cancel the repeat A-B mode, press the REP.AB button on the remote control again.
Pause playback During playback press the pause button on the remote control to pause the playback. Press the pause button on the remote control again to resume normal playback. Fast forward During playback press the fast forward button on the remote control to fast forward the playback. Press the play/enter button on the remote control to resume normal playback. Rewind During playback press the rewind button on the remote control to rewind the playback.
JPEG Disc or JPEG USB device playback To play a disc with JPEG content: Turn the unit on 1. Enter DVD mode by pressing the DVD button on the remote control. 2. Press the eject button on the remote control or the eject button on the main unit (5) to open the disc tray. 3. Place the disc in the disc tray. 4. Press the eject button on the remote control or the eject button on the main unit (5) to close the disc tray.
Listening to music during photo playback (USB mode only) It is possible to listen to music during JPEG files playback. To do this, connect a USB device that contains both JPEG as music files. When the automatic playback starts press the menu button on the remote control to open the root menu. In the root menu use the direction buttons on the remote control to go to the audio tracks and start playback by pressing the enter button on the remote control.
Mono / stereo sound Press the L/R/LANG/MO/ST button on the remote control to switch between mono/stereo sound. Remark: This function is very useful when the stereo signal is bad, the sound will improve when you switch to mono. Other functions on the remote control 2 or 5.1 Channel downmix During a 5.1 CH or DTS DVD playback press the 2/5.1CH button on the remote control to select “downmix 5.1CH” for the optimal sound effect.
Advanced settings Press the setup button on the remote control to open or close the setup menu. Notes: Use the play/enter button on the remote control to enter a menu. When entered a submenu, use the left direction button to go back to the previous menu. When entered a submenu, use the right direction button to go to the next menu. DVD setup page OSD Language: This is the language in which the menu’s appear. Audio: This is the default spoken audio language. Notes: multi language DVD only.
Hue, to adjust the hue level of the video output Luma delay, only adjust this setting if the audio and video signal are not in chorus Resolution: This option must match with the HDMI resolution of the TV where the unit is connected to, please refer to the instruction manual of the TV. HDMI Setup: Here the HDMI setting can be set HDMI: Set the HDMI output on or off Audio format: Standard this option is set to auto. If the unit does not recognize HD audio, there will be no sound.
Equalizer: When listing to music these settings can be adjusted for better sound. Equalizer mode: Here the equalizer can be adjusted to the music genre. Bass boost: activate this option to get some more bass. Super bass: activate this option to get maximal bass. Treble boost: activate this option to get more treble. 3D processing: Here the pro logic settings can be adjusted. Pro logic II: Here the Pro logic II submenu can be opened. o Pro logic II: We suggest setting this option to auto.
Parental control This menu is only available if the disc tray is in eject mode or if there is no media inserted. Parental: Use this option to set the desired parental level. Kid safe, always enter password G, approve media with level general, for all other media a password must be entered. PG, approve media up to level parental guidance, for all other media a password must be entered. PG 13, approve media up to level not recommend for children under 13, for all other media a password must be entered.
Advanced connections Primary system connections: 27
Video connections in detail: 28
Advanced audio connections: 29
Troubleshooting Fault: Power supply does not work Solution: Fully insert the power plug into the AC socket Remote control does not work Replace the batteries with new ones Please aim at the unit’s remote control sensor correctly No image on the TV screen Check the system connections, according to the illustration Set the TV in video mode Check the video settings Playback is unavailable Place a disc in the tray of the unit Check that the label side is faced up Media may not be compatible with the devi
Specifications: Supported disc formats DVD, CD, CD-R, MP3 Video format MPEG2 for DVD Audio format MPEG1, MPEG2, PCM, Stereo Signal output Video format: NTSC, PAL, Auto Video output: 1.0V p-p Audio: Stereo, 1~2V (RMS) Output connections Video (RCA), S-video, Audio (RCA), 5.1CH, YUV, Coaxial, Optical Input connections USB, Audio (RCA) Power supply AC 230V/50Hz Max.
Personal notes: ________________________________ ________________________________ ________________________________ ________________________________ ________________________________ ________________________________ ________________________________ ________________________________ ________________________________ ________________________________ ________________________________ ________________________________ ________________________________ ________________________________ ________________________________
End of life This symbol indicates that the relevant electrical product or battery should not be disposed of as general household waste in Europe. To ensure the correct waste treatment of the product and battery, please dispose them in accordance to any applicable local laws of requirement for disposal of electrical equipment or batteries.