Operation Manual

8 REMOTE CONTROL FUNCTIONS
Remote Control Functions
1
Power On: Press this button to turn on
the CD player. Note that in order for the
Power On button to operate, AC power must
be applied to the unit, and the Status Mode
Indicator should glow.
2
Eject Button: Press this button to eject a
CD from the CD player.
3
Power Off: Press this button to put the
unit into Standby mode.
4
Numeric Controls: Press this button to
enter each of the desired track numbers in quick
succession using the Numeric Controls. When
you have entered the tracks to be played, press
the Play button
13
to begin the programmed
sequence.
5
Info Button: Press this button to view
the current track information on the VFD.
6
Time Button: Press this button to show
the current track time information.
7
Check Button: Press this button to check
the contents of a program while the unit is stopped.
8
Clear Button: Press to clear a
programmed set of tracks.
9
Previous Button: Press to play a
previous track. Also jumps to the beginning of
the current track if the elapsed time is more than
3 seconds into the track.
10
Display Button: Press to turn the display
light on or off on the front panel, or to adjust the
brightness.
11
Next Button: Press to play the next track.
12
Search Button: If you wish to quickly
scan through a disc to locate a particular passage
or track, press and hold the Search buttons. The
Forward Search button
12
plays the
disc forward in high speed. Holding the buttons
pressed will triple the search speed after
3 seconds. When the desired part of the disc
is heard, release the Search button to resume
normal play speed.
13
Play and Pause Button: Press this
button to pause the current track, or to begin
playback if paused or stopped.
14
+10/-10: Press the +10 button to move
to the 10th track after the current track playing.
Press the -10 button to move to the 10th track
before the track currently playing.
15
Folder Button: Discs containing
compressed MP3 data often contain several
directories and folders with data. To show the
name of the current directory or folder playing,
press one of the Folder +/– buttons once.
To skip to the next directory or folder, press the
Folder+ button again within three seconds after
the first press. For the previous directory or folder,
press the Folder– button.
16
Stop Button: Press this button to
stop the CD/MP3 playing or to escape from
the program mode (see page 13 for complete
information.)
17
Repeat Button: Press Repeat button
once will show REPEAT OFF, then press again is
REPEAT ONE, then REPEAT ALL.
18
Program Button: The HD3700’s
advanced programming capability enables you
to select certain tracks, to preset the order in
which these tracks play, and to clear specific
programmed tracks after the program was made.
(See page 13 for more information.)
19
Source Button: To select between the
CD player and the USB input as the source of
tracks to play.
20
A-B: The CD player may be programmed
to repeat any section within a track, or a
complete passage or program that includes
material in a series of tracks. Press this button
once to set A, then again later to set B, then
again to turn it off.
21
Random Button: Press this button to
play tracks in random track order.