CITATION 200 OWNER’S MANUAL
/ IMPORTANT SAFETY INSTRUCTIONS Verify Line Voltage Before Use The Citation speaker has been designed for use with 100240 volt, 50/60 Hz AC current. Connection to a line voltage other than that for which your product is intended can create a safety and fire hazard and may damage the unit. If you have any questions about the voltage requirements for your specific model or about the line voltage in your area, contact your selling dealer before plugging the unit into a wall outlet.
/ TABLE OF CONTENTS IMPORTANT SAFETY INSTRUCTIONS...........................................2 /INTRODUCTION.................................................................................... 4 /WHAT’S IN THE BOX............................................................................5 /PRODUCT OVERVIEW.............................................................................6 /CHARGING..............................................................................................9 /POWER ON............
/ INTRODUCTION This manual includes information of the CITATION 200 speaker. We encourage you to take a few minutes to read this manual, which describes the products and includes stepby-step instructions to help you set up and get started. Read and understand all the safety instructions before using your product. This product may have an important software update available. Please follow the instructions to connect the product to Wi-Fi to ensure that your product has the most recent software updates.
/ WHAT’S IN THE BOX Carefully unpack the box and check if the following parts are included. If any part is damaged, do not use it, contact your Harman Kardon retailer or customer service. 1 2 3 1. Main unit (CITATION 200 ) 2. Charging cradle 3. Power cord (1.8 m / 6 ft)* * Power cord quantity and plug type vary by regions.
/ PRODUCT OVERVIEW Top & Front 1 2 3 6 4 7 5 1. • Press to switch on or off. 2. (Multi function) • Press and hold more than 2 seconds to talk to Google Assistant. • Press to play or pause the music. • Press to stop timer / alarm ringing and responses. • Press to check battery level. 3. Microphones 4. • Press to enter the Bluetooth source.
/ PRODUCT OVERVIEW 5. _ /+ (Volume) • Press to decrease or increase the volume. 6. Power / battery indicators White (Constant) Power on Red (Blinking) Low battery White (Blinking) Charging in process White (Constant) Charging complete Off Power off 7.
/ PRODUCT OVERVIEW Back 1 2 3 1. (Wi-Fi status indicator) Excellent Fair Weak or disconnected 2. Type C USB connector • For battery charging of the speaker 3. • Push the slider to mute or unmute the microphone.
/ CHARGING Charge through the Cradle 1)b 2) 1)a 1) Connect the supplied charging cradle to power. 2) Dock CITATION 200 onto the cradle. NOTES: • Make sure that you have placed the charging cradle on a flat and stable surface near a wall outlet. • Use only the provided power cord.
/ CHARGING Charge through the USB connector • Charge CITATION 200 by using a USB cable (sold separately), one end connected to the Type C USB connector on CITATION 200 and the other end connected to the power source.
/ CHARGING Battery Indicator • Press the Red (Blinking) Low battery White (Blinkling) Charging in process White (Constant) Charging complete to check battery level.
/ POWER ON Power On / Off • Press to switch on. • To switch off, press again. White (Constant) Power on Off Power off NOTES: • • If there is no charging or activity, CITATION 200 enters powersaving mode. To avoid depleting the battery, switch off CITATION 200 if you will not use it for long periods of time.
/ CONNECTING TO WI-FI Through the Google Home app 1) Download the Google Home app on your smartphone or tablet. 2) Sign in with your Google account. If you do not have, create a new one. 3) Power on your CITATION 200. 4) Run the Google Home app and set up your CITATION 200 as instructed in the app. Always follow the instructions in the app to complete the Internet setup.
/ CONNECTING TO WI-FI *Through AirPlay setup on an iOS device 1) Power on your CITATION 200. 2) On your iOS device, go to “Settings” > “Wi-Fi”. Under “SET UP NEW AIRPLAY SPEAKER…”, select “Citation 200” and follow onscreen instructions to complete setup. Settings Wi-Fi Wi-Fi XXX SET UP NEW AIRPLAY SPEAKER… (iOS) Citation 200 NOTE: • • • *For AirPlay only users. Google Voice Assistant and Chromecast will require additional set up with the Google Home app.
/ CONNECTING TO WI-FI Wi-Fi status indicator Excellent Fair Weak or disconnected 15
/ USING YOUR CITATION 200 Use Voice Commands Talk to Google With your CITATION 200, talk to Google to play music, get answers, manage everyday tasks, and easily control smart home devices all with your voice. • Just say “Hey Google” to get started Æ CITATION 200 will respond instantly. “Hey Google” • Alternatively, press and hold more than 2 seconds to talk to Google without saying the wake word. NOTE: • For the latest voice commands, visit assistant.google.com.
/ U S I N G YO U R C I TAT I O N 20 0 Mute the microphone Mute the microphone to stop Google from listening. • To mute the microphone, switch the slider from (mute). (unmute) to Æ The Google Assistant LEDs light up amber.
With Chromecast built-in, you can stream music / tunes / podcasts / playlists from 300+ music apps to your speaker by simply tapping the Cast button. / U S I N G YO U R C I TAT I O N 20 0 Chromecast built-in™ 1) Check that your smartphone or tablet has been connected to the same network as the Citation speaker. 2) Run the Chromecast-enabled app on your smartphone or tablet. 3) Play music. Press the icon and select “Citation 200”.
/ U S I N G YO U R C I TAT I O N 20 0 AirPlay With AirPlay, you can stream music on your iOS device to the Citation speaker. Music iPhone Citation 200 1) Check that your iOS device has been connected to the same network as the Citation speaker. 2) To enter the Control Center on an iOS device, swipe down from the upper right corner (iOS 12 or later) or swipe up from the bottom edge (iOS 11 or earlier). Tap to select the connected speaker and then, start audio streaming from an app.
With multi-room playback, you can stream music from your Android or iOS device to multiple CITATION speakers. / U S I N G YO U R C I TAT I O N 20 0 Multi-room Playback Chromecast built-in™ 1) Through the Google Home app, connect multiple CITATION speakers to the same network, assign them to multiple rooms, and create groups as needed. 2) Run the Chromecast-enabled app on your smartphone or tablet. 3) Play music. Press the icon and select the grouped speakers.
/ U S I N G YO U R C I TAT I O N 20 0 AirPlay 1) On an iOS device, enter the Control Center. 2) Tap to select multiple connected speakers as needed. 3) Start music streaming from an app.
You can use your Citation speaker as an external speaker for your Bluetooth enabled smartphone or tablet. / U S I N G YO U R C I TAT I O N 20 0 Bluetooth Connect a Bluetooth device Citation 200 1) Make sure that your Citation 200 has been connected to Wi-Fi through the Google Home app (see “CONNECTING TO WI-FI”). 2) When the speaker is switched on, press to enter Bluetooth pairing mode. Æ Ready for pairing: The LED indicators light up blue and scroll. 3) Select “Citation 200” to connect.
/ U S I N G YO U R C I TAT I O N 20 0 To connect to another Bluetooth device 5S 1) When the speaker is switched on, press and hold for more than 5 seconds. Æ The previously paired device is cleared from the Citation speaker. Æ The speaker enters Bluetooth pairing mode. 2) Follow the Step 2 under “Connect a Bluetooth device”. • If the device has ever been paired with the speaker, first unpair “Citation 200” on the device.
/ SETTINGS Volume You can do the following to adjust the volume while playing music: • Press / button on the top panel to decrease or increase the volume. • Adjust the volume via the Google Home app on your smartphone or tablet. • Ask Google to adjust the volume by your voice. • Use the volume settings in your app.
/ SETTINGS Tone Controls You can adjust the bass and treble levels to tailor the sound to your desire. • To switch between the bass levels (Level 1 to Level 4), together. repeatedly press the two buttons and Æ The LED indicators blink pink to display current bass level (default: Level 3). Bass +/- • To switch between the treble levels (Level 1 to Level 4), repeatedly press the two buttons and together. Æ The LED indicators blink yellow to display current treble level (default: Level 3).
/ SETTINGS Software Upgrade The software of your Citation speaker will be automatically upgraded to the latest version when the speaker is connected to the Internet via a Wi-Fi network. Restore Factory Settings On the Citation speaker, press and hold and for more than 10 seconds to restore the default setting programmed at the factory. When the factory setting restore is complete, the Citation speaker will automatically power off and restart.
/ SPECIFICATIONS • Model Name: CITATION 200 • Power supply: 100 - 240 V ~ 50 / 60 Hz • Output power: 50 W RMS • Bluetooth version: 4.2 • Bluetooth transmitter frequency range: 2402 - 2480MHz • Bluetooth transmitter power: <10 dBm (EIRP) • Bluetooth transmitter modulation: GFSK, π/4 DQPSK, 8DPSK • Wireless network: 802.11 a/b/g/n/ac (2.4GHz/5GHz) • 2.4G Wi-Fi transmitter frequency range: 2412 – 2472 MHz (2.4GHz ISM Band, USA and Canada 11 Channels, Europe and others 13 Channels) • 2.
/ TROUBLESHOOTING Failed to connect to Wi-Fi. • Make sure that Wi-Fi is turned on. • Make sure that you have selected the right network and entered the correct password. • Make sure that your router or modem is turned on and within the range. • Make sure that your Citation speaker is connected to the same wireless LAN as your smartphone or tablet. The Google Home app cannot find the device. • Make sure that your Citation speaker is powered on. • Make sure that your network is working properly.
/ TRADEMARKS The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by HARMAN International Industries, Incorporated is under license. Other trademarks and trade names are those of their respective owners. he Wi-Fi CERTIFIED Logo is certification T marks of the Wi-Fi Alliance. Apple®, AirPlay®, iPad®, iPad Air®, iPad Pro®, and iPhone® are trademarks of Apple Inc., registered in the U.S. and other countries.
