SOUNDSTICKS WIRELESS ® Setup Guide
SOUNDSTICKS WIRELESS 1. 2. 3. 4. 5. 6. 7. Read these instructions. Keep these instructions. Heed all warnings. Follow all instructions. Do not use this apparatus near water. Clean only with a dry cloth. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. 8. Do not install near any heat sources such as radiators, heat registers, stoves or other apparatus (including amplifiers) that produce heat. 9.
SOUNDSTICKS WIRELESS ® Specifications* System Frequency range: 44Hz – 20kHz Power consumption: 4W idle, 65W maximum Subwoofer Transducer (1): 6" woofer Amplifier output power: 20W RMS Dimensions (W x H): 9-3/16" x 10-3/16" (232mm x 258mm) Step 1. Place individual Weight: 4 lb (2.2kg) SoundSticks (satellites) beside monitor/computer.
English Easy Setup Guide Bluetooth LED R L Step 5. Plug power adapter into subwoofer. Step 6. Plug power cord into wall receptacle. Step 7. Push the subwoofer volume knob/power ON/ OFF button. Unit is on when the LED is lit. Use the subwoofer volume knob to balance the subwoofer’s volume with that of the satellites. Step 8. Turn on Soundsticks Wireless. (Unit will automatically enter pairing mode.) Put Bluetooth-enabled device in pairing mode. Select “Soundsticks Wireless” on device’s pairing list.
HARMAN International Industries, Inc. 8500 Balboa Boulevard, Northridge, CA 91329 USA www.harmankardon.com Made in P.R.C. © 2012 Harman International Industries, Incorporated. All rights reserved. Features, specifications and appearance are subject to change without notice. Harman Kardon and SoundSticks are trademarks of HARMAN International Industries, Incorporated, registered in the United States and/or other countries.