RCP 6 om.
RCP 6 om.
RCP 6 om.qxd 3/15/07 11:19 AM Page 3 INTRODUCTION AND FEATURES Please register your product on our Web site at www.harmankardon.com. Note: You’ll need the product’s serial number. At the same time, you can choose to be notified about our new products and/or special promotions. WWW.HARMANKARDON.
RCP 6 om.qxd 3/15/07 11:19 AM Page 4 REMOTE CONTROL FUNCTIONS The RCP 6 remote is capable of controlling 11 devices, including the AVR 247 and the DVD 38 included in the CP 60 system. During the installation process, you may program the codes for each of your source components into the remote. Each time you wish to use the codes for any component, first press that component’s selector. This changes the button functions to the appropriate codes for that product.
RCP 6 om.
RCP 6 om.qxd 3/15/07 11:19 AM Page 6 REMOTE CONTROL FUNCTIONS Test Tone Button: Press this button to activate the test tone for manual output-level calibration. TV/Video/Video Off Button: This button has no effect on the receiver, but is used to switch video inputs on some video source components. When the DVD player has been selected (by pressing the DVD Input Selector), pressing this button disables the DVD 38’s video output to avoid “burning in” menus or still images on sensitive video displays.
RCP 6 om.qxd 3/15/07 11:19 AM Page 7 REMOTE CONTROL FUNCTIONS When the DVD player has been selected, this button performs the Zoom function. Press it to zoom in on a DVD, VCD or JPEG image. The image may be enlarged by a factor of 2x, 3x, 4x or 5x. Once the on-screen indication of the zoom ratio disappears from the screen, you may use the Navigation Buttons to explore the picture.
RCP 6 om.qxd 3/15/07 11:19 AM Page 8 REMOTE CONTROL FUNCTIONS When the DVD player has been selected, this button serves the Random function. When a CD is playing and no playlist is active, each press of this button turns random track selection on or off. Night Mode/Subtitle: Press this button to activate Night mode When the DVD player has been selected, each press of this button cycles through the available Repeat modes, excluding A-B Repeat.
RCP 6 om.qxd 3/15/07 11:19 AM Page 9 PROGRAMMING SOURCES Programming Sources The RCP 6 remote is capable of controlling not only the receiver and DVD player included in your CP system, but it may also be programmed to control many brands and models of VCRs, CD players, cable boxes, satellite receivers, cassette decks and TVs, as well as an iPod (not included) docked in Harman Kardon’s optional The Bridge. It may help to think of the remote as a book with pages.
RCP 6 om.qxd 3/15/07 11:19 AM Page 10 PROGRAMMING SOURCES Table 1 – Remote Control Codes Source Input Video 1 Video 2 Video 3 Video 4 HDMI 1 HDMI 2 DVD * CD Tape Product Type (circle one) VCR, PVR Cable, Satellite TV TV DVD, VCR/PVR, Cable, Satellite DVD, VCR/PVR, Cable, Satellite DVD CD, CD-R Cassette Remote Control Code * Do not reprogram the DVD Source Selector unless you are replacing the DVD player included in the CP 60 system with another product.
RCP 6 om.qxd 3/15/07 11:19 AM Page 11 ADVANCED FUNCTIONS The RCP 6 remote control not only operates the AVR 247 and DVD 38, but it also serves as a universal remote that may be programmed to operate many of your other home theater components. The punchthrough and macro features add even more flexibility and versatility.
RCP 6 om.qxd 3/15/07 11:19 AM Page 12 APPENDIX Refer to the numbered buttons in this drawing when using the Function List.
RCP 6 om.qxd 3/15/07 11:19 AM Page 13 APPENDIX Table A1 – Remote Control Function List No.
RCP 6 om.qxd 3/15/07 11:19 AM Page 14 APPENDIX Table A1 – (continued) No.
RCP 6 om.qxd 3/15/07 11:19 AM Page 15 APPENDIX Refer to Tables A2 through A9 when programming the codes for your components into the remote.
RCP 6 om.
RCP 6 om.
RCP 6 om.
RCP 6 om.
RCP 6 om.qxd 3/15/07 11:19 AM Page 20 250 Crossways Park Drive, Woodbury, New York 11797 www.harmankardon.com © 2007 Harman International Industries, Incorporated. All rights reserved. Part No.
