RCP3 remote OM.
RCP3 remote OM.
RCP3 remote OM.qxd 10/30/06 4:26 PM Page 3 INTRODUCTION AND FEATURES Please register your product on our Web site at www.harmankardon.com. Note: You’ll need the product’s serial number. At the same time, you can choose to be notified about our new products and/or special promotions. WWW.HARMANKARDON.
RCP3 remote OM.qxd 10/30/06 4:26 PM Page 4 REMOTE CONTROL FUNCTIONS The RCP 3 remote is capable of controlling seven devices, including the AVR 144 and the DVD 27 included in the CP 40 system. During the installation process, you may program the codes for each of your source components into the remote. Each time you wish to use the codes for any component, first press the Selector button for that component. This changes the button functions to the appropriate codes for that product.
RCP3 remote OM.
RCP3 remote OM.qxd 10/30/06 4:26 PM Page 6 REMOTE CONTROL FUNCTIONS DSP Surround/Title: Press this button to select a DSP surround mode (Hall 1, Hall 2, Theater). When the DVD player has been selected, this button serves the Title function. When a DVD is playing, press this button to go back to the main title menu for the disc. If you are playing a DVD-Audio disc that contains formats the DVD 27 is capable of playing, such as linear PCM or Dolby® Digital 5.
RCP3 remote OM.qxd 10/30/06 4:26 PM Page 7 REMOTE CONTROL FUNCTIONS inadvertently set the scan type to progressive when your video display or television is not capable of displaying progressively scanned video. Although your video display may be distorted, you may restore interlaced scanning by pressing this button. Disc Skip: This button has no effect on the AVR 144 or the DVD 27, but is used with some optical disc changers to skip to the next disc.
RCP3 remote OM.qxd 10/30/06 4:26 PM Page 8 BATTERIES The RCP 3 remote control uses three AAA batteries, which are included. To remove the battery cover located on the back of the remote, firmly press the ridged depression and slide the cover towards the top of the remote. Insert the batteries as shown in Figure 1, making sure to observe the correct polarity. Figure 1 – Remote Battery Compartment When using the remote, remember to point the lens toward the front panel of the AVR 144 or DVD 27.
RCP3 remote OM.qxd 10/30/06 4:26 PM Page 9 PROGRAMMING SOURCES Programming Sources The RCP 3 remote is capable of controlling not only the receiver and DVD player included in your CP system, but it may also be programmed to control many brands and models of VCRs, DVD players, CD players, cable boxes, satellite receivers, cassette decks and TVs. It may help to think of the remote as a book with pages. Each page represents the button functions for a different device.
RCP3 remote OM.qxd 10/30/06 4:26 PM Page 10 USING EzSET Using EzSet This section replaces Step Four in the Initial Setup section of the AVR 144 owner’s guide. An essential step in setting up your multichannel audio/video receiver is calibrating the channel output levels so that they all sound equally loud at the listening position.
RCP3 remote OM.qxd 10/30/06 4:26 PM Page 11 ADVANCED FUNCTIONS The RCP 3 remote control not only operates the AVR 144 and DVD 27, but it also serves as a universal remote that may be programmed to operate many of your other home theater components. The punchthrough and macro features add even more flexibility and versatility.
RCP3 remote OM.qxd 10/30/06 4:26 PM Page 12 APPENDIX Refer to the numbered buttons in this drawing when using the Function List.
RCP3 remote OM.qxd 10/30/06 4:26 PM Page 13 APPENDIX Table A1 – Remote Control Function List No.
RCP3 remote OM.qxd 10/30/06 4:26 PM Page 14 APPENDIX No. Button Name AVR Function DVD CD/CD-R Tape VCR (VID1) CBL (VID2) SAT (VID2) 44 Direct/Angle Direct Tuner Entry Angle Random Play FAV FAV 45 Clear Clear Clear Clear 46 Preset Up Preset Tune Up Slow Forward* Bypass Next Music Alt 47 Tuning Down Tuning Down Prev Chapter* Track Increment 48 Tone/P/ I Tone mode P/ I Program 49 D.
RCP3 remote OM.qxd 10/30/06 4:26 PM Page 15 APPENDIX Refer to Tables A2 through A8 when programming the codes for your components into the remote.
RCP3 remote OM.
RCP3 remote OM.
RCP3 remote OM.
RCP3 remote OM.
RCP3 remote OM.qxd 10/30/06 4:26 PM Page 20 250 Crossways Park Drive, Woodbury, New York 11797 www.harmankardon.com © 2006 Harman International Industries, Incorporated. All rights reserved. Part No.
