Operation Manual

15
Harman Kardon
Connecting Take Control to Your
Computer
When you connect Take Control to your
computer, you can transfer data between
the TC1000 and your computer. Transfer-
ring data enables the TC1000 to use the
configuration changes that you set up
with software in your computer—an
extremely powerful capability.
To connect the TC1000 to your
computer:
1 Insert the TC1000 compact disc into
your CD-ROM drive.
2 Plug the computer-connector plug of
the serial cable into the computer-
connector port on top of the system
controller.
3 Plug the 9-pin connector into a serial
port on your computer.
To serial port on
your computer
76009mnl2.p65 9/1/98, 2:27 PM15
Black