Hardware Guide

© SAMSUNG Electronics Co., Ltd. Confidential & Proprietary
29 / 82
2.2 LGA Interface guideline
2.2.1. ANT port
Place 3 matching components close to ANT port (Figure 2-3) to improve RF performance
Figure 2-3 Matching components at ANT port
NAD LGA
100pF
N.C
N.C
ANT
2.2.2 MIPI
If TCU use Qorvo ANT switch, USID pin of ANT switch should be connected to VIO pin, to distinguish it
from the ANT switch in NAD side.
2.2.3 PCIe
Place 220nF series capacitor close to MTK pin if they do not have any recommendation.