INFP1419SAT-750 OM 9/8/03 4:01 PM Page 1 TOTAL SPEAKER SOLUTIONS SAT-750 Owner’s Guide
INFP1419SAT-750 OM 8/11/03 10:37 AM Page 2
INFP1419SAT-750 OM 8/11/03 10:37 AM Page 3 SAT-750 OWNER’S GUIDE Table of Contents 2 Introduction 2 Unpacking the Speaker 2 Placement 3 Wall-Mounting the Satellites 3 Speaker Connections 4 Operation 4 Maintenance and Service 4 Specifications SAT-750 1
INFP1419SAT-750 OM 8/11/03 10:38 AM Page 4 INTRODUCTION Home Theater Infinity Total Solutions™ Infinity Total Solutions continues Infinity’s longstanding commitment to accurate sound reproduction. Our proprietary Metal Matrix Diaphragm (MMD™) drivers, precision dividing networks and rigid, well-braced enclosures combine to deliver uncompromised performance in any stereo or multichannel home theater system.
INFP1419SAT-750 OM 8/11/03 10:38 AM Page 5 WALL-MOUNTING THE SATELLITES SPEAKER CONNECTIONS The SAT-750 satellites are designed to be mounted on the wall. There is a wall bracket for each satellite speaker. Each speaker bracket will require (2) 1-1/2," #10 wood screws; each screw should be fastened to a wall stud. If a wall stud is unavailable, install an anchor appropriate for a 1-1/2," #10 screw.
INFP1419SAT-750 OM 8/11/03 10:38 AM Page 6 OPERATION SPECIFICATIONS Surround Modes SAT-750 When using the system in a Dolby* Digital or DTS home theater system, make sure all SAT-750 speakers are set to “Small”. Frequency Range: 120Hz – 20,000Hz (±3dB) When using the SAT-750 in a Dolby Pro Logic* home theater system, make sure the receiver’s center channel mode is set to “Normal.
INFP1419SAT-750 OM 8/11/03 NOTES 10:38 AM Page 7
INFP1419SAT-750 OM 8/11/03 10:37 AM Page 8 © 2003 Harman International Industries, Incorporated Infinity Systems, 250 Crossways Park Drive, Woodbury, NY 11797 USA 516.674.4INF (USA only) www.infinitysystems.com * Trademarks of Dolby Laboratories. DTS is a registered trademark of Digital Theater Systems, Inc. Infinity is a registered trademark, and Total Solutions and MMD are a trademarks, of Harman International Industries, Incorporated.