HARMONIC RESOLUTION SYSTEMS R1 ISOLATION BASE Discover Your System’s Capability
Introduction Thank you for purchasing the Harmonic Resolution Systems R1 Isolation Base. When used properly, it will give you many years of superior musical or video signal reproduction. The R1 Isolation Base significantly reduces the negative impact of structure borne vibration on your audio or video component performance. Many years of engineering experience, custom material development, and listening tests are incorporated into the design of the R1 Isolation Base.
Lifting or moving the isolation base should always be done by means of the outer rectangular frame. Do not lift the isolation base by the external feet attached to the bottom of the rectangular frame. Set-Up Instructions Placing components with sharp or pointed feet directly on the isolation base will cause nicks, scratches or gouges in the surface. Use of a protective barrier between any metallic like feet or sharp objects will prevent damage to the isolation base surface.
The ideal isolation base setup is to have the center of gravity of the component in the geometric center of the isolation base. This will result in even loading of the isolation feet. This can be achieved by estimating the center of gravity of your component and placing it in the geometric center of the isolation base. Even loading of the isolation feet can also be achieved by moving the component until the isolation base is level.
Specifications The following specifications are based on your R1 Isolation Base part number. The part number is composed of the following information sequence. Series - Model Number - Load Range R1 Isolation Base Physical Characteristics Model Number 1921 1719 Dimensions inch (cm) Weight lbs. (Kg) 19 x 21 x 3 ( 48.3 x 53.3 x 7.6 ) 17 x 19 x 3 ( 43.2 x 48.3 x 7.6 ) 22 (10.0) 18 (8.
Care and Maintenance The R1 Isolation Base is a very low maintenance item that will provide many years of trouble free performance by applying these basic care instructions. Clean the surfaces of the R1 using a lint-free soft (non-abrasive) cloth. Use a lightly damp cloth if required or use a spray wax pledge cleaning product to obtain a nice luster finish. Do not use any solvents and do not use any abrasive cleaners or abrasive materials on any part of the isolation base.
Limited Warranty Harmonic Resolution Systems warrants the product designated herein to be free of manufacturing defects in material and workmanship subject to the conditions herein set forth, for a period of 90 days from the date of purchase by the original purchaser.
During the warranty period, Harmonic Resolution Systems will repair or replace any defective components free of charge. A Return Authorization Number (RA Number) obtained directly from Harmonic Resolution Systems is required before any product is returned to Harmonic Resolution Systems for any reason. This number must be visible on the exterior of the shipping container(s) for Harmonic Resolution Systems to accept the return.
HARMONIC RESOLUTION SYSTEMS INC. 2495 Main Street, Suite 355 Buffalo, NY 14214 Telephone: 716-873-1437 Web: www.avisolation.com E-mail: info@avisolation.