| SAFETY WARNINGS ! 1. This bed is designed for use only mattress (es) meeting the following specifications on the upper bunk, and lower bunk Upper bed Bed Type Length Width Thickness Twin Standard 747-75" Y= 6" max Full Standard 747-75" 5354" 6" max Lower bed Bed Type Length Width Thickness Twin Standard 747-75" 37Y=3BY* 8" max Full Standard 747-75" 53-54" 8" max 2. Replacement parts, including additional guardrails, maybe obtained from any of our (CLOUDED TECHNOLOGY (USA) INC.
Hardware List(Box 2-wFr288728) Co— Assembly Tools Required (Not Included) Screws 1/4" x80 Screws 1/4" x70 Wood dowel PCs PCs PCs A 21/4" x 100 mm 21/4" x 13 mm Hex-Head bolts PCs Horizontal-Hole bolts PCs Allen Key 1pc @1/4" x 35 mm 21/4" Hex-Head bolts PCs Canopy head though -2cs Wood Screws PCs 10 11 12 Screws 1/4" x30 Screws 1/4" x50 21/4" x 25 mm PCs apes Hex-Head bolts PCs 21/4" x 60 Daumier Hex-Head bolts PCs Wood dowel PCs Wood Screws PCs ne n7 n8 21/6" x 25 mm Handle Wood 212 x 70 mm Hex-Head bolts
STE P 1 » Following below illustration Assembly Boston bed's Foot board .
STE P 2 . Following below illustration Assembly Bottom bed's Headboard .
STE P 3: Following below illustration 3 -Using hardware #3 connect B3,B4,B5 Wood bar with AS Leg H Using hardware #3 connect B2,B4,B5 Wood bar with AG Leg v RIGHT Ag ul 12/36
STE P 4 ~ Following below illustration Using hardware #4, #5 and dowel follow detail view to Assembly Bosom bed's Headboard (Completed on step 2) and Foot board (2) v (Completed on step 1) with side rail at detail view for mots detail yy 2 13/36
STE P 7 ~ Following below illustration Using hardware #4, #5 and dowel follow detail view to Assembly Bosom bed's Headboard (Completed on step 2) and Foot board A (Completed on step 1) with side rail at detail view for more detail 2 16/36
i NN 12(pcs) |-Using hardware #10 connect Side Rails C7,C8 and Guardrails with Rails STE Following below illustration: H Look at detail view for more detail 19/36
STEP 14-1 vibrato iow snot: 13 14] 2 Using hardware and dowel #14 to connect H2,H3 panels with H1 panel Following below illustration: 15 -Using hardware #15 to connect Frame(completed on step 14-1) with Back panel H4 ao” 23/36
11 = PCs) STE Following below illustration -Using hardware #11 to Assembly Frames(completed on step 20) with P8 wood bar fk) to Assembly Hin Look at detail view for more detail -Using hardware #19 9 18(pcs) 30/36
below Illustration STEP 26: rou Using hardware #20 to Assembly Frames(completed on step 25) with P1(x2) panels -Look at detail view for more detail
