Instructions / Assembly

3-in-1 Quick Change – Auto Lock Operating Instructions
Latch Pins
Correct incline Incorrect incline
Correct 4 wheel Incorrect 4 wheel
While standing to the side of the hand truck, squeeze the
two latch pins together, begin rotating the handle
forward, release the pins, and continue rotating forward
until handle locks into 45 degree position. When the auto
lock mechanism is properly engaged, the inclined cart is
ready for use.
(The alignment decal should be positioned at 45 degrees)
Incline Four Wheel Cart Position
Four Wheel Cart Position
To change into a horizontal four wheel cart from the
incline cart position, squeeze the two latch pins together,
lower the frame until it bottoms out on the caster bracket
assembly and release the latch pins.
(The alignment decal should be positioned at 180 degrees)
To return to the Standard position, squeeze latch pins
with one hand and with the other hand, grab the frame
and lift until truck returns to two wheels. Release latch
pins to engage auto lock mechanism.