User Manual
Table Of Contents
- INTRODUCTION
- BASIC SETUP
- BASIC OPERATIONS
- XG-100P Controls
- Top Display
- Main Display
- Menu Navigation
- Before First Time Use
- Power On and Set Volume
- Select Channel Bank
- Select Channel Using Knob
- Turn Encryption On or Off
- Select Zone Using Menus
- Make an Individual Call
- Make a Priority Call
- Select a New Talkgroup
- Use Talkaround to Bypass Repeater
- Start Scan
- Stop Scan
- Nuisance Delete
- View GPS Information
- Emergency Operation
- ADVANCED OPERATIONS
- PROGRAMMING
- REFERENCE
- GLOSSARY
- INDEX
104
XG-100
PROGRAMMING
5
7. Use to highlight and
select RX FREQUENCY.
8. Enter new receive
frequency.
9. Use to select OK.
10. Use to cancel.
11. For digital channel, modify
remaining channel
settings:
• TX FREQUENCY -
Transmit frequency.
• TALKGROUP -
Talkgroup name
cannot be set here.
• RX NAC - Network
Access Code (NAC)
radio uses for selective
squelch in receive.
• TX NAC - NAC radio
transmits to break
selective squelch on
receiving radio
(Monitor and Squelch
Types).
DIGITAL
CHANNEL
SHOWN