User Manual
Table Of Contents
- INTRODUCTION
- BASIC SETUP
- BASIC OPERATIONS
- XG-100P Controls
- Top Display
- Main Display
- Menu Navigation
- Before First Time Use
- Power On and Set Volume
- Select Channel Bank
- Select Channel Using Knob
- Turn Encryption On or Off
- Select Zone Using Menus
- Make an Individual Call
- Make a Priority Call
- Select a New Talkgroup
- Use Talkaround to Bypass Repeater
- Start Scan
- Stop Scan
- Nuisance Delete
- View GPS Information
- Emergency Operation
- ADVANCED OPERATIONS
- PROGRAMMING
- REFERENCE
- GLOSSARY
- INDEX
107
XG-100
PROGRAM M ING
5
• TXTONE - Tone radio
transmits to break
selective squelch on
receiving radio
(Monitor and Squelch
Types).
• TX CODE - Code radio
transmits to break
selective squelch on
receiving radio
(Monitor and Squelch
Types).
Channels configured with TX
SQUELCH type of CDCSS A or
CDCSS B use RXCODE and
TXCODE.
Channels configured with TX
SQUELCH type of CTCSS use
RXTONE and TXTONE.
14. Use to exit menu.
15. Use to exit menu.
NEW
CHANNEL
SETTINGS