User Manual
Table Of Contents
- INTRODUCTION
- BASIC SETUP
- BASIC OPERATIONS
- XG-100P Controls
- Top Display
- Main Display
- Menu Navigation
- Before First Time Use
- Power On and Set Volume
- Select Channel Bank
- Select Channel Using Knob
- Turn Encryption On or Off
- Select Zone Using Menus
- Make an Individual Call
- Make a Priority Call
- Select a New Talkgroup
- Use Talkaround to Bypass Repeater
- Start Scan
- Stop Scan
- Nuisance Delete
- View GPS Information
- Emergency Operation
- ADVANCED OPERATIONS
- PROGRAMMING
- REFERENCE
- GLOSSARY
- INDEX
INDEX-131
XG-100
INDEX
I
Plus, Zeroize Keys Using KVL
3000
.................................... 53
Power On and Set Volume ........... 23
Priority (PRI), Set or Remove ....... 93
Priority 1 Channel ....................... 91
Priority Call, Make a .................... 30
Programmable Hot Key and
Buttons
................................ 108
Programming ............................. 101
Programming Via CPA ................ 102
R
Radio, Assemble the ................... 14
Radio, Zeroize All from ................ 52
Receiving an Emergency Call ...... 42
Reference ................................. 109
Remove Priority (PRI), Set or ....... 93
Removing Optional Belt Clip ........ 16
Removing the Battery ................. 16
Rename Scan List ...................... 91
Repeater, Use Talkaround to
Bypass
................................. 33
S
Scan (Shortcut Menu), Start or
Stop
.................................... 80
Scan List, Add New .................... 87
Scan List, Delete ........................ 94
Scan List, Edit ............................ 89
Scan List, Rename ..................... 91
Scan List, Set Active ................... 95
Scan vs Custom Scan, Zone ........ 86
Scan, Set up .............................. 85
Scan, Start ................................ 35
Scan, Stop ................................ 37
Scan, Zone Scan vs Custom ........ 86
Select a New Talkgroup ............... 31
Select Channel Bank .................. 24
Select Channel Using Knob ......... 24
Select Zone Using Menus ............ 26
Set Active Scan List .................... 95
Set or Remove Priority (PRI) ........ 93
Set up Scan ............................... 85
Set Volume, Power On and .......... 23
Settings Menu ............................62
Settings, Audio ...........................64
Settings, Battery .........................76
Settings, Clock ...........................76
Settings, Display .........................68
Settings, GPS .............................70
Setup, Basic ............................... 13
Shortcut Menu ............................ 78
Speaker, Mute/Unmute ................83
Squelch Types, Monitor and .........81
Start or Stop Scan (Shortcut
Menu)
..................................80
Start Scan ..................................35
Stop Scan ..................................37
Stop Scan (Shortcut Menu),
Start or
.................................80
Storage Guidelines ...................... 12
T
Talkaround to Bypass Repeater,
Use
......................................33
Talkgroup, Select a New ..............31
Time Use, Before First .................23
Top Display ................................20
Top Display, Flip .........................85
Turn Encryption On or Off ............25
Types, Monitor and Squelch ......... 81
U
up Scan, Set ..............................85
Use Talkaround to Bypass
Repeater
..............................33
Use, Before First Time .................23
Using Knob, Select Channel ......... 24
Using KVL 3000 Plus, Zeroize
Keygroups
............................55
Using KVL 3000 Plus, Zeroize
Keys
....................................53
Using Menus, Select Zone ...........26
Utility Menu ................................97
V
Via CPA, Programming ................102
View GPS Information .................40
Volume, Power On and Set ..........23