User Manual
Table Of Contents
- INTRODUCTION
- BASIC SETUP
- BASIC OPERATIONS
- XG-100P Controls
- Top Display
- Main Display
- Menu Navigation
- Before First Time Use
- Power On and Set Volume
- Select Channel Bank
- Select Channel Using Knob
- Turn Encryption On or Off
- Select Zone Using Menus
- Make an Individual Call
- Make a Priority Call
- Select a New Talkgroup
- Use Talkaround to Bypass Repeater
- Start Scan
- Stop Scan
- Nuisance Delete
- View GPS Information
- Emergency Operation
- ADVANCED OPERATIONS
- PROGRAMMING
- REFERENCE
- GLOSSARY
- INDEX
25
XG-100
BASIC OPERATI ONS
3
TURN ENCRYPTION ON OR OFF
Refer to Create Keys and Load Keys.
1. Use to set
encryption:
• Ø - Encryption
• O - No encryption
Key appears when encryption is
used for channel that is digital
and programmed to be
encrypted.
Analog channels do not show
the encryption key.
NOTE: When encryption is
turned on and you use a digital
channel not configured for
encryption, the radio will not
allow PTT. The screen displays
CLEAR TX DENIED.
When encryption is turned on
and you use an analog channel
not configured for encryption,
the radio will PTT. The signal will
be transmitted unencrypted.