User Manual
Table Of Contents
- INTRODUCTION
- BASIC SETUP
- BASIC OPERATIONS
- XG-100P Controls
- Top Display
- Main Display
- Menu Navigation
- Before First Time Use
- Power On and Set Volume
- Select Channel Bank
- Select Channel Using Knob
- Turn Encryption On or Off
- Select Zone Using Menus
- Make an Individual Call
- Make a Priority Call
- Select a New Talkgroup
- Use Talkaround to Bypass Repeater
- Start Scan
- Stop Scan
- Nuisance Delete
- View GPS Information
- Emergency Operation
- ADVANCED OPERATIONS
- PROGRAMMING
- REFERENCE
- GLOSSARY
- INDEX
R
HARRIS CORPORATION RF COMMUNICATIONS DIVISION
1680 University Avenue Rochester, New York 14610-1887 USA
Tel: 585-244-5830. Fax: 585-242-4755. http://www.harris.com
PUBLICATION NUMBER: 10515-0372-4200
DECEMBER 2009
Rev. -
Information and descriptions contained herein are the property of Harris
Corporation. Such information and descriptions may not be copied or
reproduced by any means, or disseminated or distributed without the
express prior written permission of Harris Corporation, RF
Communications Division, 1680 University Avenue, Rochester, New
York 14610-1887.
This manual is based on Firmware Version 1.0
Copyright 2009 by Harris Corporation
All Rights Reserved
UNITY
™
XG-100P
FULL-SPECTRUM
MULTIBAND RADIO
OPERATIONS MANUAL