User Manual
Table Of Contents
- INTRODUCTION
- BASIC SETUP
- BASIC OPERATIONS
- XG-100P Controls
- Top Display
- Main Display
- Menu Navigation
- Before First Time Use
- Power On and Set Volume
- Select Channel Bank
- Select Channel Using Knob
- Turn Encryption On or Off
- Select Zone Using Menus
- Make an Individual Call
- Make a Priority Call
- Select a New Talkgroup
- Use Talkaround to Bypass Repeater
- Start Scan
- Stop Scan
- Nuisance Delete
- View GPS Information
- Emergency Operation
- ADVANCED OPERATIONS
- PROGRAMMING
- REFERENCE
- GLOSSARY
- INDEX
33
XG-100
BASIC OPERATI ONS
3
USE TALKAROUND TO BYPASS REPEATER
You can bypass the repeater system to communicate directly with other radios on
your current channel’s receive frequency. This is useful if you are out of range of
a repeater or if a repeater is busy. You will need to be in range of the other radio.
1. At main display, use
for main menu.
2. Use to highlight and
select CALL or just press
.
3. Use to change
TALKAROUND MODE to
ENABLED.
1
3
4
5
798
2
6
5
JK L