User Manual
Table Of Contents
- INTRODUCTION
- BASIC SETUP
- BASIC OPERATIONS
- XG-100P Controls
- Top Display
- Main Display
- Menu Navigation
- Before First Time Use
- Power On and Set Volume
- Select Channel Bank
- Select Channel Using Knob
- Turn Encryption On or Off
- Select Zone Using Menus
- Make an Individual Call
- Make a Priority Call
- Select a New Talkgroup
- Use Talkaround to Bypass Repeater
- Start Scan
- Stop Scan
- Nuisance Delete
- View GPS Information
- Emergency Operation
- ADVANCED OPERATIONS
- PROGRAMMING
- REFERENCE
- GLOSSARY
- INDEX
43
XG-100
BASIC OPERATI ONS
3
Declaring an Emergency Call
1. Press .
For digital channels, the radio
transmits talkgroup or radio ID to
dispatch console or receiving
radio.
The radio will go through
transmit and receive cycles if
configured.
You can speak into the
microphone while the radio is
transmitting or press PTT to talk.
2. To exit emergency, either
power cycle the radio or
select EXIT EMERGENCY
from the call menu.