User Manual
Table Of Contents
- INTRODUCTION
- BASIC SETUP
- BASIC OPERATIONS
- XG-100P Controls
- Top Display
- Main Display
- Menu Navigation
- Before First Time Use
- Power On and Set Volume
- Select Channel Bank
- Select Channel Using Knob
- Turn Encryption On or Off
- Select Zone Using Menus
- Make an Individual Call
- Make a Priority Call
- Select a New Talkgroup
- Use Talkaround to Bypass Repeater
- Start Scan
- Stop Scan
- Nuisance Delete
- View GPS Information
- Emergency Operation
- ADVANCED OPERATIONS
- PROGRAMMING
- REFERENCE
- GLOSSARY
- INDEX
47
XG-100
ADVANCED OPERATIONS
4
Create Keygroup in the KVL 3000 Plus
You can generate a group of Type-3 keys in the KVL 3000 Plus:
a. Turn on the KVL 3000 Plus.
b. Select Esc.
c. Select GROUPS.
d. Select NEW.
e. Enter a Group Name (up to seven characters).
NOTE
The XG-100 can store both DES-OFB and AES-256
keys, however, only one type may be loaded at a time.
A keyset must contain only DES-OFB or only AES-256
keys.
f. Select CKRs from the programmed list until all desired CKRs are
selected.
g. Select DONE. Refer to Load Keys for loading a keyset into the radio.