User Manual
Table Of Contents
- INTRODUCTION
- BASIC SETUP
- BASIC OPERATIONS
- XG-100P Controls
- Top Display
- Main Display
- Menu Navigation
- Before First Time Use
- Power On and Set Volume
- Select Channel Bank
- Select Channel Using Knob
- Turn Encryption On or Off
- Select Zone Using Menus
- Make an Individual Call
- Make a Priority Call
- Select a New Talkgroup
- Use Talkaround to Bypass Repeater
- Start Scan
- Stop Scan
- Nuisance Delete
- View GPS Information
- Emergency Operation
- ADVANCED OPERATIONS
- PROGRAMMING
- REFERENCE
- GLOSSARY
- INDEX
49
XG-100
ADVANCED OPERATIONS
4
At the KVL 3000 Plus:
4. Select TARGET.
5. Select LOAD.
6. Select KEY.
7. Using
◄or ►, select:
• DES-OFB key
• AES-256 key
8. Press LOAD.
9. Verify that the KVL 3000
Plus screen displays
LOADED
SUCCESSFULLY OK.
10. Select OK on the KVL 3000
Plus.
11. Repeat for additional keys.
12. Remove the KVL 3000
Plus cable from the radio.
Esc
Ctrl
Shift
BackPwr
1 2
3
A
4 5
6 B
7 8
9 C
G F
E D