User Manual
Table Of Contents
- INTRODUCTION
- BASIC SETUP
- BASIC OPERATIONS
- XG-100P Controls
- Top Display
- Main Display
- Menu Navigation
- Before First Time Use
- Power On and Set Volume
- Select Channel Bank
- Select Channel Using Knob
- Turn Encryption On or Off
- Select Zone Using Menus
- Make an Individual Call
- Make a Priority Call
- Select a New Talkgroup
- Use Talkaround to Bypass Repeater
- Start Scan
- Stop Scan
- Nuisance Delete
- View GPS Information
- Emergency Operation
- ADVANCED OPERATIONS
- PROGRAMMING
- REFERENCE
- GLOSSARY
- INDEX
69
XG-100
ADVANCED OPERATIONS
4
3. Use to change
settings as desired:
• FRONT BACKLIGHT -
Turn front display
backlight on, off, or
momentary.
• FRONT
BRIGHTNESS - Set
brightness level of front
display. A level of 0
does not turn off front
display.
• TOP ORIENTATION -
Set orientation of top
display to be viewed
from radio FRONT,
BACK or AUTO.
When AUTO is used,
the XG-100P changes
top display to be
viewed from back if an
external microphone or
speaker is attached.
Otherwise, the display
can be viewed from the
front.
• TOP BRIGHTNESS -
Set brightness level of
top display. A level of 0
turns off top display
and indicator (TX/RX)
LED.
4. Use to exit menu.